FORD GALAXY 1.9L 8V TDI 85kW/114HP EDC15 P/P+

ECU BOSCH EDC15P+ · 116 CV (85 kW) · 1900 cc · Diesel sovralimentato

ECU DatabaseFORD › FORD GALAXY 1.9L 8V TDI 85kW/114HP EDC15 P/P+

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 10 firmware versions

Vehicle data

BrandFORD
ModelGALAXY
Engine1.9L 8V TDI 85kW/114HP EDC15 P/P+
Stock power116 CV / 85 kW
Displacement1900 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC15P+
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure
  • EGR valve control
  • Injection period at part load
  • Injection period at full throttle
  • Injection correction
  • Torque limiter
  • Smoke limiter
  • Pre-injection basic value
  • Air mass flow
  • Overboost timing

Firmware identifiers (10)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02810102211037360084 1.13.014038906019BF 1255 BOSCH EDC15P+
02810102211037354463 1.13.012038906019BF 1088 BOSCH EDC15P+
02810102401037352299 1.08.010038906019BE 0816 BOSCH EDC15P+
02810106291037363161 1.13.015038906019FA 1516 BOSCH EDC15P+
02810106291037360460 1.13.026038906019FA 1269 BOSCH EDC15P+
02810106291037363952 1.13.012038906019FA 1561 BOSCH EDC15P+
02810106291037362698 1.13.015038906019FA 1454 BOSCH EDC15P+
02810106291037362033 1.13.009038906019FA 1365 BOSCH EDC15P+
02810106291037362765 1.13.014038906019FA 1457 BOSCH EDC15P+
02810111431037366045 1.13.008038906019LR 1565 BOSCH EDC15P+

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial programming system NewGenius. The ECU is located in the engine compartment behind the battery.
Original EPROM PSOP 44 pins 29F400BT. On this epron can be set a KEY. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. The ECU is located in the engine compartment behind the battery.