FORD FUSION Mk1 1.6L 16V 74kW/99HP SIM210

ECU CONTINENTAL-SIEMENS-VDO SIM210 · 101 CV (74 kW) · 1600 cc · Benzina aspirato

ECU DatabaseFORD › FORD FUSION Mk1 1.6L 16V 74kW/99HP SIM210

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 8 firmware versions

Vehicle data

BrandFORD
ModelFUSION Mk1
Engine1.6L 16V 74kW/99HP SIM210
Stock power101 CV / 74 kW
Displacement1600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSIM210
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Advance at part load
  • Advance correction
  • Load / throttle position reference
  • Injection at part load
  • RPM Limiter
  • Air mass flow

Firmware identifiers (8)

Hardware No.Software No. (chip)VersionUpdate softwareECU
E5S118113344C0E503H4SBF14E50 1.00.003E50DH4SB.HEX CONTINENTAL-SIEMENS-VDO SIM210
E610080188AAE603H4SAF14E60 1.00.004E60DH4SA.HEX CONTINENTAL-SIEMENS-VDO SIM210
L1S118113042D0L1A3W4GAF14L1A 1.00.003L1ADW4GA.HEX CONTINENTAL-SIEMENS-VDO SIM210
E610095862AAE6037HMAF14E60 1.00.004E60D7HMA.HEX CONTINENTAL-SIEMENS-VDO SIM29
E910150153AA9S61CB F14E90 1.00.0029S61CB .HEX CONTINENTAL-SIEMENS-VDO SIM29
E910179403AABS61BA F14E90 1.00.004BS61BA .HEX CONTINENTAL-SIEMENS-VDO SIM29
E910192959AA9S61CC F14E90 1.00.0039S61CC .HEX CONTINENTAL-SIEMENS-VDO SIM29
S010150162AA9S61DB F14S00 1.00.0069S61DB .HEX CONTINENTAL-SIEMENS-VDO SIM29

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):