FORD EXPLORER Mk3 4.6 L V8 175kW/235HP EEC-VI

ECU FORD EFI EEC VI · 238 CV (175 kW) · 4600 cc · Benzina aspirato

ECU DatabaseFORD › FORD EXPLORER Mk3 4.6 L V8 175kW/235HP EEC-VI

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Vehicle data

BrandFORD
ModelEXPLORER Mk3
Engine4.6 L V8 175kW/235HP EEC-VI
Stock power238 CV / 175 kW
Displacement4600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerFORD EFI
ModelEEC VI
Memory / EPROM29BL802C SSOP56 8Mbit - Flash 3_V 512K x 16

Available tuning operations / options:

  • Base timing
  • Advance for ECT sensor
  • Optimal spark timing/MBT
  • Advance for IAT sensor
  • Desired engine load calculation
  • Desired fuel quantity map for open loop
  • Engine idle
  • Engine idle in Park position
  • Injection 1
  • RPM Limiter
  • RPM limiter - fuel cut
  • Knock detection factor
  • Speed limiter
  • MAF sensor calibration
  • Maximum indicated torque
  • Maximum throttle angle opening for a given RPM
  • Air mass flow
  • Driver torque request
  • Throttle angle limitation
  • Torque limit table for ECT sensor

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
4L2AAPDJMAJDEZ.HEX 1.00.018 FORD EFI EEC VI
4U7AJMDPWAQ1AA.HEX 1.00.012 FORD EFI EEC VI

Vehicle technical notes

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU notes

This Setting File can be used for serial system NewGenius.