FORD EDGE 2.0L 16V TDCi 132kW/177HP DCM6.X

ECU DELPHI DCM6.1 · 179 CV (132 kW) · 2000 cc · Diesel sovralimentato

ECU DatabaseFORD › FORD EDGE 2.0L 16V TDCi 132kW/177HP DCM6.X

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Vehicle data

BrandFORD
ModelEDGE
Engine2.0L 16V TDCi 132kW/177HP DCM6.X
Stock power179 CV / 132 kW
Displacement2000 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerDELPHI
ModelDCM6.1
Memory / EPROMMicro BGA ST SPC5674 - 32768 Kbit -400000

Available tuning operations / options:

  • Torque limiter 1 gear
  • Torque limiter 2 gear
  • Torque limiter 3 gear
  • Torque limiter 4 gear
  • Torque limiter 5 gear
  • Torque limiter other gears
  • Boost pressure
  • EGR valve control
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Engine idle vs. ECT sensor
  • Engine idle
  • Injection period
  • Injection period 2
  • Injection opening time related to inj. pressure
  • J
  • Torque limiter
  • Lambda value of the smoke limitation
  • Maximum indicated torque
  • Max torque profile
  • Specific injection pressure limiter
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Driver torque request
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limit table for IAT sensor
  • Take-off torque law in Normal mode
  • Take-off torque law in Sport mode
  • Variable geometry duty cycle limit

Firmware identifiers (4)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1TFMCBFL_B061D01G2GA-12A650-UH 1.54.007H2GA-14C204-AUC DELPHI DCM6.1
1TFMCBFL_B061D01G2GA-12A650-UH 1.54.005H2GA-14C204-AUA DELPHI DCM6.1
1TFMCBFL_B061D01G2GA-12A650-UD 1.81.010G2GA-14C204-UD DELPHI DCM6.1
1TFMCBFL_B061D01G2GA-12A650-UF 1.81.010G2GA-14C204-UF DELPHI DCM6.1

ECU notes

Microprocessor BGA SPC5674 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata