FIAT STILO 2.4L 20V ABARTH 125kW/168HP ME3.1

ECU BOSCH ME3.1 / ME7.3H4 · 170 CV (125 kW) · 2400 cc · Benzina aspirato

ECU DatabaseFIAT › FIAT STILO 2.4L 20V ABARTH 125kW/168HP ME3.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 6 firmware versions

Vehicle data

BrandFIAT
ModelSTILO
Engine2.4L 20V ABARTH 125kW/168HP ME3.1
Stock power170 CV / 125 kW
Displacement2400 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME3.1 / ME7.3H4
Memory / EPROMHYBRID ECU - 4.096Kbit 0x80000

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Advance full load
  • Injection at part load
  • Injection at full throttle
  • Speed limiter

Firmware identifiers (6)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612066551037363857 1.44.006 BOSCH ME3.1 / ME7.3H4
02612066551277356595 1.44.008 BOSCH ME3.1 / ME7.3H4
02612066551277356574 1.44.003 BOSCH ME3.1 / ME7.3H4
02612076051037363858 1.44.014 BOSCH ME3.1 / ME7.3H4
02612082431037368127 1.44.001 BOSCH ME3.1 / ME7.3H4
02612082431277358127 1.44.008 BOSCH ME3.1 / ME7.3H4

Vehicle technical notes

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU notes

HYBRID ECU! To modify this ECU you need our serial protocol FLASH_0018. Please read the manual handbook to connect the specific cable. This Setting File can be used for serial system : Genius or NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop