FIAT PUNTO (188) 1.9L 8V JTD 59kW/79HP EDC15

ECU BOSCH EDC15C6 · 80 CV (59 kW) · 1900 cc · Diesel sovralimentato

ECU DatabaseFIAT › FIAT PUNTO (188) 1.9L 8V JTD 59kW/79HP EDC15

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 13 firmware versions

Vehicle data

BrandFIAT
ModelPUNTO (188)
Engine1.9L 8V JTD 59kW/79HP EDC15
Stock power80 CV / 59 kW
Displacement1900 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC15C6
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Main injection start angle
  • Boost pressure limiter
  • Boost pressure
  • Injection at part load
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter

Firmware identifiers (13)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02810019551037352250 1.05.008 BOSCH EDC15C6
02810019551037351392 1.05.034 BOSCH EDC15C6
02810019551037352600 1.05.027 BOSCH EDC15C6
02810108461037362658 1.05.046 BOSCH EDC15C7
02810108461037362658 1.05.004 BOSCH EDC15C7
02810110981037367794 1.05.006 BOSCH EDC15C7
02810114261037367797 1.05.006 BOSCH EDC15C7
02810114941037371885 1.00.0111037371885 BOSCH EDC15C7
02810114941037369126 1.05.009 BOSCH EDC15C7
02810114951037369125 1.05.005 BOSCH EDC15C7
02810114951037371887 1.05.004 BOSCH EDC15C7
02810114961037369123 1.05.005 BOSCH EDC15C7
02810114961037371888 1.05.008 BOSCH EDC15C7

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM PSOP 44 pins 29F400BT. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This Setting File can be used for serial system : Genius or NewGenius.
Original EPROM PSOP 44 pins 29F400BT. This Setting File can be used for serial programming system NewGenius. To work on this ECU you can use NewTrasdata