Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 15 firmware versions
Vehicle data
| Brand | FIAT |
| Model | DOBLO Mk2 |
| Engine | 2.0L 16V MJET 99kW/133HP EDC16C39 |
| Stock power | 135 CV / 99 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | LCV |
ECU
| Manufacturer | BOSCH |
| Model | EDC16C39 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Injection period in aftertreatment modes
- Max injection limit
- Max injection limit - limp mode
- Injection correction for IAT sensor
- Initialization values over pressure control valve
- J
- Torque limiter 2
- Torque limiter 3
- Boost pressure deviation limits for basic charge air pressure
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Driver torque request
- CAT downstream temperature sensor characterization
- CAT upstream temperature sensor characterization
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for selected gear
- Torque limiter for selected gear 2
- Torque limiter for for reverse gear
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Volumetric efficiency
- Volumetric efficiency - correction
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
Firmware identifiers (15)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 0281016965 | 1037506377 |
1.67.018 | — |
BOSCH EDC16C39 |
| 0281016965 | 1037506398 |
1.67.015 | — |
BOSCH EDC16C39 |
| 0281016965 | 1037504040 |
1.67.016 | — |
BOSCH EDC16C39 |
| 0281016965 | 1037514047 |
1.67.020 | — |
BOSCH EDC16C39 |
| 0281016966 | 1037510713 |
1.67.020 | — |
BOSCH EDC16C39 |
| 0281016966 | 1037514048 |
1.67.028 | — |
BOSCH EDC16C39 |
| 0281016966 | 1037506378 |
1.67.019 | — |
BOSCH EDC16C39 |
| 0281018316 | 1037518683 |
1.67.005 | — |
BOSCH EDC16C39 |
| 0281018316 | 1037524775 |
1.67.006 | — |
BOSCH EDC16C39 |
| 0281018701 | 1037519578 |
1.67.014 | — |
BOSCH EDC16C39 |
| 0281018701 | 1037524773 |
1.67.012 | — |
BOSCH EDC16C39 |
| 0281018702 | 1037519579 |
1.67.013 | — |
BOSCH EDC16C39 |
| 0281018702 | 1037524774 |
1.67.017 | — |
BOSCH EDC16C39 |
| 0281018722 | 1037518684 |
1.67.023 | — |
BOSCH EDC16C39 |
| 0281018723 | 1037521580 |
1.67.007 | — |
BOSCH EDC16C39 |
Vehicle technical notes
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU notes
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
