Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 6 firmware versions
Vehicle data
| Brand | FIAT |
| Model | DOBLO Mk2 |
| Engine | 1.6L 16V MJET 66kW/89HP EDC17C49 |
| Stock power | 90 CV / 66 kW |
| Displacement | 1600 cc |
| Fuel | Benzina aspirato |
| Vehicle type | LCV |
ECU
| Manufacturer | BOSCH |
| Model | EDC17C49 |
| Memory / EPROM | MICRO ST TRICORE - 32768 Kbit - 400000 |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure limiter 3
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- Protection for engine overheating
- Correction factor for APS/BPS sensor
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Injection correction for IAT sensor
- Initialization values over pressure control valve
- L
- Torque limiter 3
- Torque limiter 4
- Boost pressure deviation limits for basic charge air pressure
- Torque limiter
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature setpoint
- LSU temperature threshold PID heater governor activation
- Maximum torque value for selected gear
- Maximum torque value for reverse gear
- Maximum torque value for reverse gear 2
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Driver torque request
- Driver torque request - AT
- Driver torque request at the start
- Driver torque request at the start - AT
- CAT upstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Torque limiter for selected gear
- Torque limiter for selected gear - AT
- Torque limiter for for reverse gear - AT
- Torque limiter for EFT sensor
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque model - fuel quantity to torque conversion
- Torque model - torque to fuel quantity conversion
- Take-off torque law
- Takeoff torque law in jump start
- Take-off torque law - reverse gear
- Volumetric efficiency
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
Firmware identifiers (6)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 0281030776 | 1037544624 |
1.00.010 | 1037544624 |
BOSCH EDC17C49 |
| 0281030836 | 1037558227 |
1.00.003 | 1037558227 |
BOSCH EDC17C49 |
| 0281030840 | 1037544626 |
1.00.010 | 1037544626 |
BOSCH EDC17C49 |
| 0281030841 | 1037530313 |
1.00.009 | 1037530313 |
BOSCH EDC17C49 |
| 0281030841 | 1037544627 |
1.00.008 | 1037544627 |
BOSCH EDC17C49 |
| 0281032178 | 1037552731 |
1.00.006 | 1037552731 |
BOSCH EDC17C49 |
Vehicle technical notes
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU notes
MICRO Infineon Tricore TC1797 To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
