FIAT BRAVO Mk2 1.4L 16V TJET 88kW/118HP ME7.9.10

ECU BOSCH ME7.9.10 · 120 CV (88 kW) · 1400 cc · Benzina sovralimentato

ECU DatabaseFIAT › FIAT BRAVO Mk2 1.4L 16V TJET 88kW/118HP ME7.9.10

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 9 firmware versions

Vehicle data

BrandFIAT
ModelBRAVO Mk2
Engine1.4L 16V TJET 88kW/118HP ME7.9.10
Stock power120 CV / 88 kW
Displacement1400 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.9.10
Memory / EPROMMICRO ST - 6656 Kbit

Available tuning operations / options:

  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Advance correction
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Advance limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • RPM limit for ECT sensor
  • RPM limit for EOT sensor
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Throttle air mass flow calculation
  • Max torque profile
  • Optimal engine moment
  • Driver torque request
  • Driver torque request for reverse gear
  • Driver torque request Sport mode
  • Throttle angle management
  • Overboost timing

Firmware identifiers (9)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.91.012 BOSCH ME7.9.10
02612016871037392100 1.91.018 BOSCH ME7.9.10
02612016881037396771 1.91.024 BOSCH ME7.9.10
02612016881037396660 1.91.006 BOSCH ME7.9.10
02612016881037391128 1.91.020 BOSCH ME7.9.10
0261S043691037399276 1.91.003 BOSCH ME7.9.10
0261S057141037502931 1.91.004 BOSCH ME7.9.10
0261S058721037500840 1.91.016 BOSCH ME7.9.10
0261S064591037510429 1.91.016 BOSCH ME7.9.10

Vehicle technical notes

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU notes

Microprocessor ST10F275 This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata