ECU Database ›
FIAT › FIAT 500 X (334) 1.5L 16V TURBO 96kW/130HP 48V-Hybrid GPEC4LM
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 1 firmware versions
Vehicle data
| Brand | FIAT |
| Model | 500 X (334) |
| Engine | 1.5L 16V TURBO 96kW/130HP 48V-Hybrid GPEC4LM |
| Stock power | 131 CV / 96 kW |
| Displacement | 1500 cc |
| Fuel | Benzina sovralimentato mild hybrid - MHEV |
| Vehicle type | Auto |
ECU
| Manufacturer | CONTINENTAL-SIEMENS-VDO |
| Model | GPEC4LM |
| Memory / EPROM | MICRO BGA FREESCALE MPC5674F - 32768 Kbit - 400000 |
Available tuning operations / options:
- Torque supply enrichment - AT
- Boost pressure limiter
- Exhaust gas temperature
- Exhaust gas temperature - E100
- Engine idle vs. ECT sensor
- Gearbox maximum torque allowed
- High pressure fuel pump setpoint
- High pressure fuel pump setpoint 2
- High pressure fuel pump setpoint - cold condition
- High pressure fuel pump setpoint - full load
- High fuel pressure pump limit for ECT sensor
- High-pressure fuel pump - in catalyst heating monitoring mode
- J
- Torque limiter 2
- Torque limiter 3
- Torque limiter 4
- Torque limiter 5
- Torque limiter 6
- Torque limiter
- Torque limiter - AT
- Torque limiter - GPF protection
- Torque limiter in Eco mode
- Torque limiter in hybrid mode
- Lambda enrichment for cylinders protection
- Lambda enrichment for exhaust protection
- Torque limiter at flywheel
- RPM Limiter
- RPM limiter 3
- Maximum permitted engine speed for manual gear selection
- RPM limiter in Park position
- RPM limiter - transmission protection
- Driver torque request limiter
- Driver torque request limiter 2
- Knock detection factor
- Minimum torque monitoring - acceleration
- Max torque profile - AT
- Driver torque request
- Driver torque request 2
- Driver torque request launch control mode
- Cooling fan activation
- Torque limit table for IAT sensor
- Torque limit table for IAT sensor 2
- Torque limit table for EOT sensor
- Torque limitation - turbocharger protection
- Torque limit table for ECT sensor
- Torque model - air mass to torque per cylinder conversion
- Torque model - torque to air flow per cylinder conversion
- Volumetric efficiency
- Voluimetric efficiency
- Volumetric efficiency - ECT correction
- Volumetric efficiency - IAT correction
Firmware identifiers (1)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
| 68415284AA | 4LM22P20V09.0_ENGV09.0_TXXV09.0 |
1.80.006 | 68612971AB |
CONTINENTAL-SIEMENS-VDO GPEC4LM |
Vehicle technical notes
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU notes
Microprocessor BGA FREESCALE MPC5674F To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU