DUCATI XDIAVEL 1260 16->20 115kW

ECU BOSCH ME17.9.21 · 156 CV (115 kW) · 1260 cc · Benzina aspirato

ECU DatabaseDUCATI › DUCATI XDIAVEL 1260 16->20 115kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 12 firmware versions

Vehicle data

BrandDUCATI
ModelXDIAVEL 1260
Engine16->20 115kW
Stock power156 CV / 115 kW
Displacement1260 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerBOSCH
ModelME17.9.21
Memory / EPROMMICRO ST TRICORE - 12288 Kbit - 180000

Available tuning operations / options:

  • Base timing
  • Minimum advance allowed
  • Minimum advance allowed protection
  • Optimal spark timing/MBT
  • Advance at part load
  • Knock correction advance max
  • Desired engine load calculation
  • Desired engine load calculation 2
  • Lambda correction f(IAT)
  • Desired throttle angle
  • Exhaust gas temperature
  • Exhaust gas temperature threshold for component protection
  • Engine torque limit for transmission protection
  • Factor to correct fuel delivery system
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • Rpm threshold fuel cut
  • Lambda enrichment for components protection
  • Lambda minimum value for components protection
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM limiter - N
  • RPM limiter - R
  • Speed limiter
  • Throttle air mass flow calculation
  • Maximum throttle angle opening for a given RPM
  • Nominal throttle opening
  • Optimal engine moment
  • Power limit torque table
  • Requested torque map set 1
  • Requested torque map set 1 - monitoring
  • Requested torque map set 1 - monitoring 2
  • Requested torque map set 2
  • Requested torque map set 2 - monitoring
  • Requested torque map set 2 - monitoring 2
  • Requested torque map set 3
  • Requested torque map set 3 - monitoring
  • Requested torque map set 3 - monitoring 2
  • Driver torque request - MT
  • Requested torque map set 4 - monitoring
  • Requested torque map set 4 - monitoring 2
  • Variable valve timing - inlet
  • Variable valve timing - outlet

Firmware identifiers (12)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.91.00710SW041871 BOSCH ME17.9.21
1.91.00810SW039165 BOSCH ME17.9.21
1.91.01110SW018904 BOSCH ME17.9.21
1.91.01110SW039114 BOSCH ME17.9.21
1.91.01010SW049005 BOSCH ME17.9.21
1.91.01010SW013001 BOSCH ME17.9.21
1.91.01010SW049218 BOSCH ME17.9.21
1.91.02210SW008788 BOSCH ME17.9.21
1.91.02210SW009408 BOSCH ME17.9.21
1.91.01310SW041698 BOSCH ME17.9.21
1.91.00510SW022983 BOSCH ME17.9.21
1.91.02410SW087938 BOSCH ME17.9.21

ECU notes

Microprocessor TC1724 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.
Microprocessor TC1724 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. DP2 - Ducati Performance with full exhaust