DUCATI HYPERMOTARD 950 19->20 84kW

ECU CONTINENTAL-SIEMENS-VDO Easy U1 · 114 CV (84 kW) · 950 cc · Benzina aspirato

ECU DatabaseDUCATI › DUCATI HYPERMOTARD 950 19->20 84kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 8 firmware versions

Vehicle data

BrandDUCATI
ModelHYPERMOTARD 950
Engine19->20 84kW
Stock power114 CV / 84 kW
Displacement950 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelEasy U1
Memory / EPROMMICRO BGA MOTOROLA FRESCALE con FLASH interna 8192 Kbit - 0x100000

Available tuning operations / options:

  • Spark timing front cylinder
  • Spark timing rear cylinder
  • Air mass flow MAP ratio based - front cylinder
  • Air mass flow MAP ratio based - rear cylinder
  • Air mass flow TPS based - front cylinder
  • Air mass flow TPS based - rear cylinder
  • Basic setpoint Lambda - front cylinder
  • Basic setpoint Lambda - rear cylinder
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter 3
  • RPM limiter 4
  • Air mass flow limit
  • Driver torque request

Firmware identifiers (8)

Hardware No.Software No. (chip)VersionUpdate softwareECU
D1E00311EBBBAI1 1.00.007 CONTINENTAL-SIEMENS-VDO Easy U1
D1E00311EBXAAH1 1.00.004 CONTINENTAL-SIEMENS-VDO Easy U1
D1E00311EBBAAG1 1.00.016 CONTINENTAL-SIEMENS-VDO Easy U1
D1E00311EBTAAH1 1.00.020 CONTINENTAL-SIEMENS-VDO Easy U1
D1E00311EBBDAI1 1.00.002 CONTINENTAL-SIEMENS-VDO Easy U1
D1E00311EBBFAI1 1.00.003 CONTINENTAL-SIEMENS-VDO Easy U1
D1E00311EBBBAG1 1.00.005 CONTINENTAL-SIEMENS-VDO Easy U1
D1E00311EBTAAD1 1.00.006 CONTINENTAL-SIEMENS-VDO Easy U1

Vehicle technical notes

OBD is located on the right side near the engine block. It may be necessary to remove the bulkheads.
ECU located in the engine bay to the right or left of the engine block, visible or hidden by a plastic lid. Difficulty:easy

ECU notes

Microprocessor FMPC 5534 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius.
Microprocessor FMPC 5534 To work on this ECU you can use NewTrasdata This Setting File can be used for serial system NewGenius. ATTENTION - 35kW reduced power version file.