English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

DONKERVOORT D8 GT 1.8L TURBO 200kW/268HP ME7.5/5

ECU BOSCH ME7.5 · 272 CV (2 kW) · 1800 cc · Benzina sovralimentato

ECU Database › DONKERVOORT › DONKERVOORT D8 GT 1.8L TURBO 200kW/268HP ME7.5/5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandDONKERVOORT
ModelD8 GT
Engine1.8L TURBO 200kW/268HP ME7.5/5
Stock power272 CV / 2 kW
Displacement1800 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Boost pressure limiter 4
  • Boost pressure limiter 5
  • Boost pressure limit control
  • Height correction for boost pressure
  • Desired engine load calculation
  • Maximum pressure ratio limit for diagnosis
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • Boost pressure linearization
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Maximum boost pressure load
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Pressure ratio depending on IAT
  • Maximum pressure ratio limit depending on temperature
  • Driver torque request
  • Throttle angle management
  • Variable intake pulsation correction

Firmware identifiers (2)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612080011037363650 1.21.013— BOSCH ME7.5
02612080021037363651 1.21.009— BOSCH ME7.5

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION!

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other DONKERVOORT

D8 GT
1.8L TURBO ME3.8.3

→ All ECUs DONKERVOORT