DACIA LOGAN Mk1 1.4L 8V 55kW/74HP SIRIUS32

ECU CONTINENTAL-SIEMENS-VDO SIRIUS 32 · 75 CV (55 kW) · 1400 cc · Benzina aspirato

ECU DatabaseDACIA › DACIA LOGAN Mk1 1.4L 8V 55kW/74HP SIRIUS32

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 10 firmware versions

Vehicle data

BrandDACIA
ModelLOGAN Mk1
Engine1.4L 8V 55kW/74HP SIRIUS32
Stock power75 CV / 55 kW
Displacement1400 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSIRIUS 32
Memory / EPROM29F200 PSOP44 2Mbit - Flash 128K x 16 (256K x 8)

Available tuning operations / options:

  • Advance at part load
  • Advance correction
  • Weighting map cold-start
  • Injection at part load
  • Injection correction
  • RPM Limiter
  • Fuel mass injection at start up

Firmware identifiers (10)

Hardware No.Software No. (chip)VersionUpdate softwareECU
82000444378200069294 1.25.003 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82003263808200483736 1.25.006 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82003263808200486052 1.25.003 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82003263808200483705 1.25.004 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82003263808200472756 1.25.005 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938200739113 1.25.009 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938201010292 1.25.005 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938200691234 1.25.004 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938200661124 1.25.010 CONTINENTAL-SIEMENS-VDO SIRIUS 32
82005983938201399334 1.25.003 CONTINENTAL-SIEMENS-VDO SIRIUS 32

Vehicle technical notes

OBD visible at the bottom of the glove compartment.

ECU notes

Original EPROM PSOP 44 pins 29F200BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. This setting file can work with files from Genius or New Genius only. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F200BB. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata