CITROEN XSARA 1.6L 16V VTS 81kW/109HP ME7.4.4

ECU BOSCH ME7.4.4 · 110 CV (81 kW) · 1600 cc · Benzina aspirato

ECU DatabaseCITROEN › CITROEN XSARA 1.6L 16V VTS 81kW/109HP ME7.4.4

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 10 firmware versions

Vehicle data

BrandCITROEN
ModelXSARA
Engine1.6L 16V VTS 81kW/109HP ME7.4.4
Stock power110 CV / 81 kW
Displacement1600 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.4.4
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Base timing
  • Advance at idle speed
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Exhaust gas temperature
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda driver wish
  • Knock detection factor
  • Optimal engine moment
  • Driver torque request
  • Driver torque request 2

Firmware identifiers (10)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612066061037353509 1.32.0159644219780 BOSCH ME7.4.4
02612066061037367958 1.32.0179651396380 BOSCH ME7.4.4
02612066061037353328 1.32.0159643148380 BOSCH ME7.4.4
02612066061037364035 1.32.0189647345280 BOSCH ME7.4.4
02612066061037366739 1.32.0159649426780 BOSCH ME7.4.4
02612066331037353565 1.32.0159644842980 BOSCH ME7.4.4
02612066331037353163 1.32.0239641747580 BOSCH ME7.4.4
02612072231037353532 1.32.0149643618180 BOSCH ME7.4.4
02612076921037371016 1.32.0059657193180 BOSCH ME7.4.4
96387659801037372838 1.32.0089653702380 BOSCH ME7.4.4

Vehicle technical notes

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial programming system NewGenius.