Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 11 firmware versions
Vehicle data
| Brand | CITROEN |
| Model | JUMPY |
| Engine | 2.0L 16V BlueHDi 90kW/121HP DCM6.2A |
| Stock power | 122 CV / 9 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | LCV |
ECU
| Manufacturer | DELPHI |
| Model | DCM6.2A |
| Memory / EPROM | MICRO BGA FREESCALE MPC5674F - 32768 Kbit - 400000 |
Available tuning operations / options:
- Boost pressure limiter 2
- Boost pressure limiter 3
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure limit control
- Boost pressure
- Boost pressure 2
- Boost pressure F (temperature)
- Load / throttle position reference
- Load / throttle position reference 2
- Load / throttle position reference 3
- Max exhaust gas temperature curve for full load
- Basic torque management at engine cranking
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Injection period 5
- Injection opening time related to inj. pressure
- J
- Injection 2
- Injection 3
- Injection 4
- Injection 5
- Torque limiter
- Torque limiter for smoke limitation
- Maximum indicated torque
- Maximum indicated virtual torque
- Maximum engine power
- Throttle air mass flow calculation
- Max torque profile
- Max torque profile - AT
- Max torque profile for diagnostic
- Max torque profile - MT
- Specific injection pressure limiter
- Specific injection pressure limiter for EFT sensor
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 5
- Specific injection pressure 6
- Driver torque request
- Driver torque request for medium speed
- Driver torque request for low speed
- Driver torque request from MAP sensor
- Driver torque request at the start
- Driver torque request for reverse gear
- Torque limiter for gear-shift too long
- Torque limiter for selected gear
- Torque limiter for the APS/BPS
- Torque limit table for IAT sensor
- Torque limiter for EFT sensor
- Torque limit table for EOT sensor
- Torque limit table for the rail pressure demand
- Torque limit table for ECT sensor
- Take-off torque law from MAP sensor
Firmware identifiers (11)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 9809447980 | 9809447980 |
1.00.027 | 9692491180 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.00.008 | 9692280080 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.00.016 | 9693142980 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.00.020 | 9693143080 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.00.007 | 9692491080 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.00.012 | 9692914180 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.84.015 | 9693231480 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.84.008 | 9695354580 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.84.009 | 9693231780 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.00.008 | 9692233680 |
DELPHI DCM6.2A |
| 9809447980 | 9809447980 |
1.84.009 | 9694053980 |
DELPHI DCM6.2A |
Vehicle technical notes
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU notes
Microprocessor BGA FREESCALE MPC5674F This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
