CITROEN JUMPY 2.0L 16V BlueHDi 130kW/174HP DCM7.1A

ECU DELPHI DCM7.1A · 177 CV (13 kW) · 2000 cc · Diesel sovralimentato

ECU DatabaseCITROEN › CITROEN JUMPY 2.0L 16V BlueHDi 130kW/174HP DCM7.1A

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 11 firmware versions

Vehicle data

BrandCITROEN
ModelJUMPY
Engine2.0L 16V BlueHDi 130kW/174HP DCM7.1A
Stock power177 CV / 13 kW
Displacement2000 cc
FuelDiesel sovralimentato
Vehicle typeLCV

ECU

ManufacturerDELPHI
ModelDCM7.1A
Memory / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848Kbyte

Available tuning operations / options:

  • Boost pressure limiter
  • Boost pressure limiter 2
  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure limit control
  • Boost pressure
  • Boost pressure F (temperature)
  • Load / throttle position reference
  • Load / throttle position reference 2
  • Load / throttle position reference 3
  • Max exhaust gas temperature curve for full load
  • Exhaust gas temperature threshold for component protection
  • Basic torque management at engine cranking
  • Injection period
  • Injection period 10
  • Injection period 2
  • Injection period 3
  • Injection period 4
  • Injection period 5
  • Injection period 6
  • Injection period 7
  • Injection period 8
  • Injection period 9
  • Injection opening time related to inj. pressure
  • Injection 1
  • J
  • Injection 3
  • Injection 4
  • Injection 5
  • Injection 6
  • Injection 7
  • Torque limiter
  • Torque limiter for diagnostic
  • Torque limiter for smoke limitation
  • Torque limiter for smoke limitation 2
  • Maximum indicated torque
  • Maximum indicated virtual torque
  • Maximum indicated virtual torque 2
  • Maximum engine power
  • Throttle air mass flow calculation
  • Throttle air mass flow calculation 2
  • Max torque profile
  • Max torque profile - AT
  • Max torque profile for diagnostic
  • Max torque profile - MT
  • Max torque profile for IAT sensor
  • Specific injection pressure limiter
  • Specific injection pressure limiter 2
  • Specific injection pressure limiter 3
  • Specific injection pressure limiter for diagnostics
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 3
  • Specific injection pressure 4
  • Specific injection pressure 6
  • Specific injection pressure 7
  • Specific pressure injection after starting
  • Specific pressure injection after starting 2
  • Driver torque request
  • Driver torque request for high speed
  • Driver torque request for low speed
  • Driver torque request from MAP sensor
  • Driver torque request from MAP sensor - interpolation
  • Driver torque request at the start
  • Driver torque request for reverse gear
  • Torque limiter for gear-shift too long
  • Torque limiter for selected gear
  • Torque limiter for the APS/BPS
  • Torque limiter for EFT sensor
  • Torque limit table for EOT sensor
  • Torque limit table for the rail pressure demand
  • Torque limit table for ECT sensor
  • Take-off torque law from MAP sensor

Firmware identifiers (11)

Hardware No.Software No. (chip)VersionUpdate softwareECU
98180350809818035080 1.00.0469693947280 DELPHI DCM7.1A
98180350809818035080 1.00.0099694023980 DELPHI DCM7.1A
98180350809818035080 1.00.0079695117880 DELPHI DCM7.1A
98180350809818035080 1.00.0089695119180 DELPHI DCM7.1A
98180350809818035080 1.00.0109695175480 DELPHI DCM7.1A
98180350809818035080 1.00.0109696871680 DELPHI DCM7.1A
98180350809818035080 1.00.0089693740980 DELPHI DCM7.1A
98180350809818035080 1.00.0109694024080 DELPHI DCM7.1A
98333465809833346580 1.00.0219697429980 DELPHI DCM7.1A
98333465809833346580 1.00.0029696821080 DELPHI DCM7.1A
98333465809833346580 1.00.0079696816580 DELPHI DCM7.1A

ECU notes

Microprocessor TC297TP_96 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata