CITROEN C4 PICASSO 1.6L 16V HDI 80kW/107HP EDC16C34

ECU BOSCH EDC16C34 · 109 CV (8 kW) · 1600 cc · Diesel sovralimentato

ECU DatabaseCITROEN › CITROEN C4 PICASSO 1.6L 16V HDI 80kW/107HP EDC16C34

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 23 firmware versions

Vehicle data

BrandCITROEN
ModelC4 PICASSO
Engine1.6L 16V HDI 80kW/107HP EDC16C34
Stock power109 CV / 8 kW
Displacement1600 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelEDC16C34
Memory / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Available tuning operations / options:

  • Maximum engine boost pressure F (atmospheric pressure)
  • Boost pressure
  • Boost pressure in aftertreatment modes
  • Boost pressure in aftertreatment modes 2
  • Boost pressure F (temperature)
  • EGR valve control
  • EGR valve control 2
  • Basic torque management at engine cranking
  • Injection period
  • Injection opening time related to inj. pressure
  • Injection period in aftertreatment modes
  • Injection period in aftertreatment modes 2
  • Injection period in aftertreatment modes 3
  • Max injection limit
  • Max injection limit - limp mode
  • J
  • Injection in aftertreatment modes 1
  • Injection in aftertreatment modes 2
  • Injection in aftertreatment modes 3
  • Torque limiter 2
  • Torque limiter
  • Lambda value of the smoke limitation
  • Injection quantity for engine overheating protection
  • Protection for fuel overheating
  • Specific injection pressure limiter
  • Specific injection pressure limiter for EFT sensor
  • Specific injection pressure
  • Specific injection pressure in aftertreatment modes
  • Specific pressure injection after starting
  • Air mass flow
  • Driver torque request
  • Driver torque request for high speed - AT
  • Driver torque request for low speed - AT
  • Driver torque request for reverse gear
  • CAT downstream temperature sensor characterization
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for selected gear - AT
  • Torque limiter for for reverse gear
  • Torque limiter for the APS/BPS
  • Torque limiter in recovery mode
  • Take-off torque law in Normal mode
  • Variable geometry duty cycle limit
  • Variable geometry duty cycle limit in regeneration mode
  • Variable geometry duty cycle limit in regeneration mode 2

Firmware identifiers (23)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.67.0131037393480 BOSCH EDC16C34
1.67.0191037389516 BOSCH EDC16C34
1.67.0191039398208 BOSCH EDC16C34
1.67.0101037395389 BOSCH EDC16C34
1.67.0161037395385 BOSCH EDC16C34
1.67.0131037386155 BOSCH EDC16C34
1.67.0031037395385 BOSCH EDC16C34
1.67.0091037386175 BOSCH EDC16C34
1.67.0131037374952 BOSCH EDC16C34
1.67.0181037393479 BOSCH EDC16C34
1.67.0111037398246 BOSCH EDC16C34
1.67.0071037389515 BOSCH EDC16C34
1.67.0151037501018 BOSCH EDC16C34
1.67.0151037389513 BOSCH EDC16C34
1.67.0041037395383 BOSCH EDC16C34
1.67.0091037398250 BOSCH EDC16C34
1.67.0201037380743 BOSCH EDC16C34
1.67.0191037389513 BOSCH EDC16C34
1.67.0101037380744 BOSCH EDC16C34
1.67.0031037389517 BOSCH EDC16C34
1.67.0051037389546 BOSCH EDC16C34
1.67.0091037398251 BOSCH EDC16C34
1.67.0121037398251 BOSCH EDC16C34

Vehicle technical notes

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):