CITROEN C3 Mk2 1.4L 8V 50kW/67HP Valeo Johnson J34P

ECU VALEO JOHNSON J34P · 68 CV (5 kW) · 1400 cc · Benzina aspirato

ECU DatabaseCITROEN › CITROEN C3 Mk2 1.4L 8V 50kW/67HP Valeo Johnson J34P

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 18 firmware versions

Vehicle data

BrandCITROEN
ModelC3 Mk2
Engine1.4L 8V 50kW/67HP Valeo Johnson J34P
Stock power68 CV / 5 kW
Displacement1400 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerVALEO JOHNSON
ModelJ34P
Memory / EPROMMICRO ST - 6656 Kbit

Available tuning operations / options:

  • Advance at part load
  • Advance correction
  • Load / throttle position reference
  • Injection at full throttle
  • Specific air mass charge 2
  • Air mass flow

Firmware identifiers (18)

Hardware No.Software No. (chip)VersionUpdate softwareECU
9679215080 1.03.0039679214880 VALEO JOHNSON J34P
9679215080 1.03.0039691946780 VALEO JOHNSON J34P
9679215080 1.03.0029691999880 VALEO JOHNSON J34P
9679215080 1.03.0049679190880 VALEO JOHNSON J34P
9600000080 1.03.0059667327980 VALEO JOHNSON J34P
96516966809665424480 1.00.0069678280380 VALEO JOHNSON J34P
96516966809665424480 1.00.007 VALEO JOHNSON J34P
96553991809651696680 1.03.0039661123380 VALEO JOHNSON J34P
96553991809651696680 1.03.0079661386280 VALEO JOHNSON J34P
96553991809651696680 1.03.0049661123480 VALEO JOHNSON J34P
96553991809651696680 1.00.0079665051280 VALEO JOHNSON J34P
96665913809666591380 1.03.0149667331180 VALEO JOHNSON J34P
96665913809667373380 1.03.0069667373680 VALEO JOHNSON J34P
96665913809667373380 1.03.0049678887380 VALEO JOHNSON J34P
96665913809666591380 1.03.0059667373480 VALEO JOHNSON J34P
96665913809666591380 1.03.0079678886980 VALEO JOHNSON J34P
96665913809666591380 1.03.0069667152680 VALEO JOHNSON J34P
96745420809679215080 1.03.0039691736480 VALEO JOHNSON J34P

Vehicle technical notes

OBD located to the left of the driver's side, under the steering column and behind the bulkhead or the lid in the fuse box area.

ECU notes

Microprocessor ST10F273 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor ST10F275 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop