CITROEN C1 MK1 1.4L 8V HDI 40kW/54HP SID80X

ECU CONTINENTAL-SIEMENS-VDO SID801/SID801A/SID802/SID804 · 54 CV (4 kW) · 1400 cc · Diesel sovralimentato

ECU DatabaseCITROEN › CITROEN C1 MK1 1.4L 8V HDI 40kW/54HP SID80X

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 7 firmware versions

Vehicle data

BrandCITROEN
ModelC1 MK1
Engine1.4L 8V HDI 40kW/54HP SID80X
Stock power54 CV / 4 kW
Displacement1400 cc
FuelDiesel sovralimentato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelSID801/SID801A/SID802/SID804
Memory / EPROM29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

  • Boost pressure
  • Boost pressure 2
  • Injection at part load
  • Injection correction
  • Injection at full throttle
  • Torque limiter
  • Smoke limiter
  • Specific injection pressure limiter
  • Specific injection pressure
  • Air mass flow

Firmware identifiers (7)

Hardware No.Software No. (chip)VersionUpdate softwareECU
96520971809659188880 1.26.0139662276280 CONTINENTAL-SIEMENS-VDO SID801/SID801A/SID802/SID804
96520971809663181680 1.26.0039663181680 CONTINENTAL-SIEMENS-VDO SID801/SID801A/SID802/SID804
96520971809666963880 1.26.0059666963880 CONTINENTAL-SIEMENS-VDO SID801/SID801A/SID802/SID804
96520971809661097080 1.26.0159661097080 CONTINENTAL-SIEMENS-VDO SID801/SID801A/SID802/SID804
96520971809659188880 1.26.0059659188880 CONTINENTAL-SIEMENS-VDO SID801/SID801A/SID802/SID804
96520971809664780280 1.26.0059664780280 CONTINENTAL-SIEMENS-VDO SID802/804/805/806
96520971809663248380 1.26.0049663248380 CONTINENTAL-SIEMENS-VDO SID802/804/805/806

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. This Setting File can be used for serial system NewGenius.

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):