CHRYSLER CROSSFIRE 3.2L V6 160kW/215HP ME2.8 — ECU BOSCH ME2.8

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 8 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	CHRYSLER
Model	CROSSFIRE
Engine	3.2L V6 160kW/215HP ME2.8
Stock power	218 CV / 16 kW
Displacement	3200 cc
Fuel	Benzina aspirato
Vehicle type	Auto

ECU

Manufacturer	BOSCH
Model	ME2.8
Memory / EPROM	29F400 PSOP44 4Mbit - Flash 256K x 16

Available tuning operations / options:

Base timing
Lambda/AFR full load/WOT
Lambda/AFR mixture at part load
Optimal spark timing/MBT
Advance at part load
Load / throttle position reference
RPM Limiter
Speed limiter
Manifold absolute pressure time delay
Characteristic manifold absolute pressure time constant of the LRS
Relative permissible torque from the pedal position in torque limitation
Requested engine filling

Firmware identifiers (8)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	—	1.16.007	—	BOSCH ME2.8
1121533279	1037365081	1.16.006	—	BOSCH ME2.8
1121535379	1037365223	1.16.016	—	BOSCH ME2.8
1121535779	1037365174	1.16.012	—	BOSCH ME2.8
1121537679	1037365364	1.16.007	—	BOSCH ME2.8
1121538379	1037371582	1.16.008	—	BOSCH ME2.8
1121538679	1037375211	1.16.011	—	BOSCH ME2.8
1121539679	1037375226	1.16.008	—	BOSCH ME2.8

Vehicle technical notes

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU notes

Original EPROM PSOP 44 pins 29F400BB. This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator. To work on this ECU you can use NewTrasdata In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY.

Original EPROM PSOP 44 pins 29F400BB. In order to read and write this EPROM with the programmer you need the adapter for PSOP and the card 01B with EMP20, or 202B with EMP21. On this epron can be set a KEY. This Setting File is enabled for serial programming system : Genius or New Genius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other CHRYSLER

VOYAGER
2.5L TD 85kW/115HP MOTRONIC EDC VOYAGER
3.1L TD 103kW/138HP MOTRONIC EDC VOYAGER
2.0L 16V 98kW/131HP 28F200 PT CRUISER
2.0L 16V 104kW/139HP CHRYSLER VOYAGER
2.5L 8V CRD 104kW/140HP EDC15C3 PT CRUISER
2.2L 16V CRD 89kW/119HP EDC15C3 NEON
2.0L 16V 98kW/131HP CHRYSLER STRATUS
2.5L V6 121kW/162HP CHRYSLER STRATUS
2.0L 16V 98kW/131HP CHRYSLER VOYAGER
3.3L V6 128kW/172HP CHRYSLER

→ All ECUs CHRYSLER