CHRYSLER 300 Mk2 C 5.7L V8 32V HEMI 271kW/363HP GPEC2

ECU CONTINENTAL-SIEMENS-VDO GPEC2 · 368 CV (271 kW) · 5700 cc · Benzina aspirato

ECU DatabaseCHRYSLER › CHRYSLER 300 Mk2 C 5.7L V8 32V HEMI 271kW/363HP GPEC2

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Vehicle data

BrandCHRYSLER
Model300 Mk2
EngineC 5.7L V8 32V HEMI 271kW/363HP GPEC2
Stock power368 CV / 271 kW
Displacement5700 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelGPEC2
Memory / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Advance at part load
  • Spark advance correction for ECT sensor
  • Advance correction for IAT sensor
  • Exhaust gas temperature
  • Exhaust valves lift
  • Exhaust valves lift - catalyst heating
  • Exhaust valves lift - full load
  • Engine idle vs. ECT sensor
  • Engine idle
  • Gearbox maximum torque allowed
  • Intake valve lift
  • Intake valve lift - catalyst heating
  • Intake valve lift - full load
  • RPM Limiter
  • RPM Limiter 2
  • RPM limiter in Park position
  • Lambda driver wish
  • Knock detection factor
  • Speed limiter
  • Driver torque request
  • Cooling fan activation
  • Volumetric efficiency
  • Volumetric efficiency - ECT correction
  • Volumetric efficiency - IAT correction

Firmware identifiers (4)

Hardware No.Software No. (chip)VersionUpdate softwareECU
05150696ACSIE12P11V02.0 ENGV02.0_TXXVXX.X 1.80.00505035769AB CONTINENTAL-SIEMENS-VDO GPEC2
05150739ABSIE12P11V10.0 ENGV10.0_TXXVXX.X 1.80.02468171371AF CONTINENTAL-SIEMENS-VDO GPEC2
05150826AASIE14P09V18.1 ENGV18.1_TXXVXX.X 1.80.00868212713AI CONTINENTAL-SIEMENS-VDO GPEC2
05150826AASIE14P09V18.0 ENGV18.0_TXXVXX.X 1.80.00468212707AH CONTINENTAL-SIEMENS-VDO GPEC2

ECU notes

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata