CHEVROLET US/EU/SAM SPARK M300 1.4L 16V 73kW/98HP DELCO E84

ECU DELCO E84 · 99 CV (73 kW) · 1400 cc · Benzina aspirato

ECU DatabaseCHEVROLET US/EU/SAM › CHEVROLET US/EU/SAM SPARK M300 1.4L 16V 73kW/98HP DELCO E84

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 3 firmware versions

Vehicle data

BrandCHEVROLET US/EU/SAM
ModelSPARK M300
Engine1.4L 16V 73kW/98HP DELCO E84
Stock power99 CV / 73 kW
Displacement1400 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerDELCO
ModelE84
Memory / EPROMMicro BGA ST MPC5676 - 600000

Available tuning operations / options:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Desired engine load calculation
  • ECT for fan engagement
  • Engine idle vs. ECT sensor
  • Engine idle
  • Engine idle in Park position
  • Lambda enrichment - open loop
  • RPM Limiter
  • RPM Limiter 2
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Torque limiter for the 6th gear selected
  • Torque limiter for for reverse gear
  • Throttle angle management

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1267306212694945 1.35.00425200933 DELCO E84
1267468812677830 1.35.00325197851 DELCO E84
1267468812675791 1.35.00225198346 DELCO E84

ECU notes

Microprocessor MPC5676R This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata