CHEVROLET US/EU/SAM MALIBU 2.4L 16V DOHC 123kW/165HP DELCO E78

ECU DELCO E78 · 167 CV (123 kW) · 2400 cc · Benzina aspirato

ECU DatabaseCHEVROLET US/EU/SAM › CHEVROLET US/EU/SAM MALIBU 2.4L 16V DOHC 123kW/165HP DELCO E78

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 3 firmware versions

Vehicle data

BrandCHEVROLET US/EU/SAM
ModelMALIBU
Engine2.4L 16V DOHC 123kW/165HP DELCO E78
Stock power167 CV / 123 kW
Displacement2400 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerDELCO
ModelE78
Memory / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Available tuning operations / options:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle
  • Engine idle in Park position
  • IVC
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter
  • Lambda enrichment - open loop
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Throttle angle management

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1264713612656286 1.91.00625194077 DELCO E78
1264713612655493 1.35.00925191019 DELCO E78
1264713612650973 1.35.01412651166 DELCO E78

Vehicle technical notes

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU notes

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual. To work on this ECU you can use NewTrasdata