Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
6 firmware versions
Vehicle data
| Brand | CHEVROLET US/EU/SAM |
| Model | MALIBU |
| Engine | 1.5L 16V TURBO 122kW/164HP DELCO E80 |
| Stock power | 166 CV / 122 kW |
| Displacement | 1500 cc |
| Fuel | Benzina sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | DELCO |
| Model | E80 |
| Memory / EPROM | Micro BGA ST MPC5676 - 600000 |
Available tuning operations / options:
- Engine ignition timing versus temperature
- Advance at idle speed
- Lambda/AFR full load/WOT
- Optimal spark timing/MBT
- Spark advance correction for ECT sensor
- Requested spark advance - high octane
- Requested spark advance - low octane
- Boost pressure
- Desired engine load calculation
- Variable exhaust camshaft timing 2
- Variable exhaust camshaft timing
- ECT for fan engagement
- Engine idle vs. ECT sensor
- Engine idle
- Engine idle in Park position
- Variable intake camshaft timing 2
- Variable intake camshaft timing
- Torque limiter 2
- Torque limiter
- Lambda enrichment - open loop
- RPM Limiter
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for for reverse gear
- Throttle angle management
- WG duty cycle vs RPM and boost
Firmware identifiers (6)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 12653681 | 12673258 |
1.91.012 | 12678100 |
DELCO E80 |
| 12653681 | 12673258 |
1.91.002 | 12691160 |
DELCO E80 |
| 12666362 | 12696162 |
1.00.011 | 12699157 |
DELCO E80 |
| 12686056 | 12709531 |
1.00.002 | 12686056 |
DELCO E80 |
| 12686056 | 12680877 |
1.00.003 | 25198684 |
DELCO E80 |
| 12686056 | 12716431 |
1.00.002 | 25203960 |
DELCO E80 |
Vehicle technical notes
OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.
ECU notes
Microprocessor MPC5676R This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual.
Get the file for this vehicle
Tools to read and write this ECU
