Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 12 firmware versions
Vehicle data
| Brand | CHEVROLET US/EU/SAM |
| Model | EPICA |
| Engine | 2.0L 16V VCDI 110kW/148HP EDC16+ |
| Stock power | 150 CV / 11 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC16C39 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure in aftertreatment modes
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection opening time related to inj. pressure
- Max injection limit
- Max injection limit - limp mode
- Initialization values over pressure control valve
- J
- Injection 2
- Torque limiter 2
- Torque limiter 3
- Boost pressure deviation limits for basic charge air pressure
- Boost pressure deviation limits for basic charge air pressure 2
- Torque limiter
- Torque limiter during particulate filter overloading - pressure
- Lambda value of the smoke limitation
- Injection quantity for engine overheating protection
- Injection quantity for engine overheating protection 3
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure
- Specific injection pressure in aftertreatment modes
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limit table for IAT sensor
- Torque limit table for IAT sensor 2
- Torque limiter in recovery mode
- Torque limiter in recovery mode 2
- Torque limiter in recovery mode 3
- Volumetric efficiency
- Volumetric efficiency - correction
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware identifiers (12)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | 0123456789P636.G30 |
1.67.026 | VAMG30O4ML |
BOSCH EDC16C39 |
| — | 1037392898P636_G37 |
1.67.021 | GF6237A4IA |
BOSCH EDC16C39 |
| — | 1037390576P465_V46 |
1.67.019 | VAM246O4MH |
BOSCH EDC16C39 |
| — | 1037394515P636_G37 |
1.67.012 | GF6237A4ID |
BOSCH EDC16C39 |
| — | 0123456789P465.V66 |
1.67.008 | VAM266S4MK |
BOSCH EDC16C39 |
| — | 1037387108P465_V46 |
1.67.019 | VAM246O4MD |
BOSCH EDC16C39 |
| — | 1037387669P636_G30 |
1.67.011 | VAMG30O4MK |
BOSCH EDC16C39 |
| — | 1037502956P636_G55 |
1.67.014 | VAMG55G4MO |
BOSCH EDC16C39 |
| — | 1037394513P636_G30 |
1.67.017 | VAMG30O4MN |
BOSCH EDC16C39 |
| — | 1037387669P636_G30 |
1.67.004 | VAMG30O4MK |
BOSCH EDC16C39 |
| — | 1037387107P465_V46 |
1.67.009 | VAA246O4MD |
BOSCH EDC16C39 |
| — | 1037502680P636_G55 |
1.67.013 | GF6255G4IG |
BOSCH EDC16C39 |
Vehicle technical notes
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU notes
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system : Genius or NewGenius. To work on this ECU you can use NewTrasdata
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. To work on this ECU you can use NewTrasdata This Setting File can be used for serial system : Genius or NewGenius.
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
