CHEVROLET US/EU/SAM COBALT 1.8L 8V FLEX 79kW/106HP DELCO E83

ECU DELCO E83 · 107 CV (79 kW) · 1800 cc · Benzina aspirato

ECU DatabaseCHEVROLET US/EU/SAM › CHEVROLET US/EU/SAM COBALT 1.8L 8V FLEX 79kW/106HP DELCO E83

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 5 firmware versions

Vehicle data

BrandCHEVROLET US/EU/SAM
ModelCOBALT
Engine1.8L 8V FLEX 79kW/106HP DELCO E83
Stock power107 CV / 79 kW
Displacement1800 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerDELCO
ModelE83
Memory / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5554 16384 Kbit - 0x200000

Available tuning operations / options:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle
  • Engine idle in Park position
  • IVC
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Throttle angle management

Firmware identifiers (5)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1264292612645749 1.35.00924579338 DELCO E83
1264292612645749 1.35.01324580079 DELCO E83
1264292612657114 1.91.01024582018 DELCO E83
1264292612657114 1.91.00424583954 DELCO E83
1264292612657114 1.91.00924583958 DELCO E83

Vehicle technical notes

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU notes

Microprocessor ST10F275 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata