CF MOTO CFORCE 1000 19->22 55kW

ECU BOSCH M7817/US6.0 · 75 CV (55 kW) · 100 cc · Benzina aspirato

ECU DatabaseCF MOTO › CF MOTO CFORCE 1000 19->22 55kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 11 firmware versions

Vehicle data

BrandCF MOTO
ModelCFORCE 1000
Engine19->22 55kW
Stock power75 CV / 55 kW
Displacement100 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerBOSCH
ModelM7817/US6.0
Memory / EPROMMicro BGA ST SPC563M64 - 12288 Kbit - 180000

Available tuning operations / options:

  • Base timing
  • Lambda/AFR full load/WOT
  • Lambda/AFR mixture at part load
  • Lambda/AFR mixture for engine temperature at crancking
  • Spark advance correction for ECT sensor
  • Desired engine load calculation
  • Exhaust gas temperature
  • Factor to correct fuel delivery system
  • Weighting map cold-start
  • Weighting map cold-start 2
  • Engine idle vs. ECT sensor
  • Engine idle vs. EOT sensor
  • Injection correction for ECT sensor
  • Injection correction for ECT sensor 2
  • Lambda enrichment for components protection
  • RPM Limiter
  • Speed limiter
  • MAP - limp home mode
  • Throttle air mass flow calculation
  • Throttle angle limitation
  • Throttle angle management
  • Volumetric efficiency

Firmware identifiers (11)

Hardware No.Software No. (chip)VersionUpdate softwareECU
F01R00DDF9X10160A762 1.88.010 BOSCH M7817/US6.0
F01R00DDF9X10160A451 1.88.006 BOSCH M7817/US6.0
F01R00DDF9X10160A771 1.88.004 BOSCH M7817/US6.0
F01R00DDF9X10160A763 1.88.002 BOSCH M7817/US6.0
F01R00DG2FX10160A7A5 1.88.004 BOSCH M7817/US6.0
F01R00DG2FX10160A777 1.88.005 BOSCH M7817/US6.0
F01R00DG2FX10160A763 1.88.008 BOSCH M7817/US6.0
F01RB0DS93X10160A451 1.88.019 BOSCH M7817/US6.0
X10704A61K 1.88.011F01RB0DK7F BOSCH MSE6.0
X10704A61L 1.88.009F01RB0DK7F BOSCH MSE6.0
X10704A01K 1.88.017F01RB0DK7F BOSCH MSE6.0

Vehicle technical notes

OBD placed under the saddle

ECU notes

Microprocessor SPC563M64 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata