BUICK ENCORE 1.4L 16V TURBO 103kW/138HP DELCO E78

ECU DELCO E78 · 140 CV (103 kW) · 1400 cc · Benzina sovralimentato

ECU DatabaseBUICK › BUICK ENCORE 1.4L 16V TURBO 103kW/138HP DELCO E78

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 3 firmware versions

Vehicle data

BrandBUICK
ModelENCORE
Engine1.4L 16V TURBO 103kW/138HP DELCO E78
Stock power140 CV / 103 kW
Displacement1400 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerDELCO
ModelE78
Memory / EPROMMICRO BGA MOTOROLA FREESCALE con FLASH interna MPC5566 24576 Kbit - 0x300000

Available tuning operations / options:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Spark advance correction for ECT sensor
  • Requested spark advance - high octane
  • Requested spark advance - low octane
  • Boost pressure
  • Desired engine load calculation
  • Variable exhaust camshaft timing 2
  • Variable exhaust camshaft timing
  • ECT for fan engagement
  • Engine idle
  • Engine idle in Park position
  • Variable intake camshaft timing 2
  • Variable intake camshaft timing
  • Torque limiter 2
  • Torque limiter
  • Lambda enrichment - open loop
  • Torque limiter for the 1st gear selected
  • Torque limiter for the 2nd gear selected
  • Torque limiter for the 3rd gear selected
  • Torque limiter for the 4th gear selected
  • Torque limiter for the 5th gear selected
  • Throttle angle management
  • WG duty cycle vs RPM and boost

Firmware identifiers (3)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1264713612655432 1.91.01024106329 DELCO E78
1264713612660102 1.91.00924107764 DELCO E78
1264713612659378 1.91.01155596967 DELCO E78

ECU notes

Microprocessor FMPC 5566 This Setting File can be used for serial system NewGenius. ATTENTION: before proceding with any serial operation please read carefully the corresponding protocol serial manual. To work on this ECU you can use NewTrasdata