BMW Z4 SERIES E89 35is 3.0L L6 24V TURBO 250kW/335HP MSD81

ECU CONTINENTAL-SIEMENS-VDO MSD81 · 340 CV (25 kW) · 3000 cc · Benzina sovralimentato

ECU DatabaseBMW › BMW Z4 SERIES E89 35is 3.0L L6 24V TURBO 250kW/335HP MSD81

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 11 firmware versions

Vehicle data

BrandBMW
ModelZ4 SERIES E89
Engine35is 3.0L L6 24V TURBO 250kW/335HP MSD81
Stock power340 CV / 25 kW
Displacement3000 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerCONTINENTAL-SIEMENS-VDO
ModelMSD81
Memory / EPROMMICRO ST TRICORE - 16384 Kbit - 200000

Available tuning operations / options:

  • Advance at part load
  • Boost pressure limiter
  • Boost pressure
  • Boost pressure F (temperature)
  • Load / throttle position reference
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter 4
  • Torque limiter 5
  • Advance limiter
  • Basic value setpoint Lambda sensor
  • Torque limiter
  • RPM Limiter
  • Speed limiter
  • Specific air mass charge 2
  • Air mass flow
  • Wastegate duty-cycle

Firmware identifiers (11)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0761135807611674 1.98.005 CONTINENTAL-SIEMENS-VDO MSD81
0761643107617778 1.98.005 CONTINENTAL-SIEMENS-VDO MSD81
0762291107627978 1.98.004 CONTINENTAL-SIEMENS-VDO MSD81
0762291107627996 1.98.017 CONTINENTAL-SIEMENS-VDO MSD81
0763999507646558 1.98.005 CONTINENTAL-SIEMENS-VDO MSD81
0861095708612604 1.98.006 CONTINENTAL-SIEMENS-VDO MSD81
0861095708612594 1.98.008 CONTINENTAL-SIEMENS-VDO MSD81
0861299808619170 1.98.005 CONTINENTAL-SIEMENS-VDO MSD81
0861975108636020 1.98.006 CONTINENTAL-SIEMENS-VDO MSD81
0861975108652504 1.98.005 CONTINENTAL-SIEMENS-VDO MSD81
0861975108636040 1.98.002 CONTINENTAL-SIEMENS-VDO MSD81

Vehicle technical notes

OBD located to the left of the driver's side, in the bulkhead close to the bonnet release lever.

ECU notes

MICRO Infineon Tricore TC1796 This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop