ECU Database ›
BMW › BMW 3 SERIES F30/F31/F35 328d 2.0L L4 16V 134kW/180HP EDC17C76
Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 10 firmware versions
Vehicle data
| Brand | BMW |
| Model | 3 SERIES F30/F31/F35 |
| Engine | 328d 2.0L L4 16V 134kW/180HP EDC17C76 |
| Stock power | 182 CV / 134 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC17C76 |
| Memory / EPROM | MICRO ST TRICORE - 32768 - 400000 |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure
- EGR valve control
- EGR valve control 2
- EGR valve control 3
- EGR valve control 4
- Max accepted exhaust gas temperature value at particulate sensor
- Exhaust gas temperature threshold for component protection
- Protection for engine overheating
- Protection for engine overheating 2
- Protection for engine overheating 3
- Basic torque management at engine cranking
- Gearbox maximum torque allowed
- Gearbox maximum torque allowed 2
- Injection period
- Injection period 2
- Injection period 3
- Injection period 4
- Maximum injection period
- Injection opening time related to inj. pressure
- Injection 1
- J
- Injection 3
- Injection 5
- Injection 6
- Injection 7
- Injection 8
- Torque limiter 2
- L
- Torque limiter 4
- Torque limiter 5
- Torque limiter 6
- Torque limiter
- Torque limiter for diagnostic
- Torque limiter for diagnostic 2
- Torque limiter during particulate filter overloading - pressure
- Torque limiter during particulate filter overloading - temperature
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature limit - heater control
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature limit - heater control
- Maximum LSU sensor temperature for O2
- LSU temperature setpoint
- LSU temperature threshold PID heater governor activation
- Speed limiter
- Maximum indicated torque
- Maximum indicated torque for monitoring
- Maximum engine torque at crank shaft
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure limiter 2
- Specific injection pressure limiter 3
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Driver torque request
- CAT upstream temperature sensor characterization
- DPF upstream temperature sensor characterization
- SCR upstream temperature sensor characterization
- Torque limiter for EFT sensor
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
- Variable geometry duty cycle limit 3
- Variable geometry duty cycle limit 4
- Variable geometry duty cycle limit 5
- Variable geometry duty cycle limit 6
- Variable geometry duty cycle limit 8
Firmware identifiers (10)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 00002666070A00 | 00002667010C00 |
1.00.004 | 00002B93010C06 |
BOSCH EDC17C76 |
| 00002666070A01 | 00002667030A02 |
1.00.011 | 00002B93030A65 |
BOSCH EDC17C76 |
| 00002666070A01 | 00002667030A02 |
1.00.010 | 00002B92030A65 |
BOSCH EDC17C76 |
| 00002666070A02 | 00002667050100 |
1.00.003 | 00002B92050107 |
BOSCH EDC17C76 |
| 00002666070A02 | 00002667050100 |
1.00.003 | 00002B93050104 |
BOSCH EDC17C76 |
| 00002666070A02 | 00002667050100 |
1.00.012 | 00002B93050107 |
BOSCH EDC17C76 |
| 00002666070A02 | 00002667040200 |
1.00.005 | 00002B93040203 |
BOSCH EDC17C76 |
| 00002666070A02 | 00002667040200 |
1.00.012 | 00002B92040214 |
BOSCH EDC17C76 |
| 00002666070A02 | 00002667050100 |
1.00.003 | 00002B92050104 |
BOSCH EDC17C76 |
| 00002666070A02 | 00002667040200 |
1.00.003 | 00002B93040214 |
BOSCH EDC17C76 |
ECU notes
MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata MICRO Infineon Tricore TC1791 MICRO Infineon Tricore TC1793
Get the file for this vehicle
Tools to read and write this ECU
