BMW MOTORRAD R NineT 14->16 81kW

ECU BOSCH ME9 BMSK / ME9+ BMSK · 110 CV (81 kW) · 1200 cc · Benzina aspirato

ECU DatabaseBMW MOTORRAD › BMW MOTORRAD R NineT 14->16 81kW

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 4 firmware versions

Vehicle data

BrandBMW MOTORRAD
ModelR NineT
Engine14->16 81kW
Stock power110 CV / 81 kW
Displacement1200 cc
FuelBenzina aspirato
Vehicle typeMoto

ECU

ManufacturerBOSCH
ModelME9 BMSK / ME9+ BMSK
Memory / EPROMM58BW016DB PQFP80 - Flash 3_V 512 x 32

Available tuning operations / options:

  • Engine ignition timing versus temperature
  • Advance at idle speed
  • Lambda/AFR full load/WOT
  • Optimal spark timing/MBT
  • Advance at part load
  • Advance full load
  • Dynamic traction control
  • Exhaust gas temperature
  • Exhaust valve management
  • Exhaust valve management 2
  • Factor to correct fuel delivery system
  • Engine torque reducing factor depending on engine speed
  • Engine idle vs. ECT sensor
  • Engine idle vs. ECT sensor 2
  • Injection correction cilinder 2
  • Rpm threshold fuel cut
  • Idle throttle angle correction for ECT sensor
  • Advance limiter for component protection 1
  • Torque limiter
  • Lambda efficiency
  • Exhaust valve opening limit
  • RPM Limiter
  • Lambda driver wish
  • Knock detection factor
  • Maximum indicated torque
  • Optimal engine moment
  • Air mass flow
  • Tilt angle for anti-wheelie activation
  • Throttle angle limitation
  • Throttle angle management
  • Front tire circumference
  • Rear tire circumference

Firmware identifiers (4)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612093911037509760 1.95.01608554055 BOSCH ME9 BMSK / ME9+ BMSK
02612093911037509760 1.95.00708554051 BOSCH ME9 BMSK / ME9+ BMSK
02612093911037509760 1.95.00508554045 BOSCH ME9 BMSK / ME9+ BMSK
02612093911037509760 1.95.01002355523 BOSCH ME9 BMSK / ME9+ BMSK

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocesor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata