AUDI S6 (4G/C7) 4.0L V8 32V TFSI 309kW/414HP MED17.1.6

ECU BOSCH MED17.1.6 · 420 CV (309 kW) · 4000 cc · Benzina sovralimentato

ECU DatabaseAUDI › AUDI S6 (4G/C7) 4.0L V8 32V TFSI 309kW/414HP MED17.1.6

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 1 firmware versions

Vehicle data

BrandAUDI
ModelS6 (4G/C7)
Engine4.0L V8 32V TFSI 309kW/414HP MED17.1.6
Stock power420 CV / 309 kW
Displacement4000 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED17.1.6
Memory / EPROMMICRO ST TRICORE - 32768 Kbit - 400000

Available tuning operations / options:

  • Base timing
  • Advance at idle speed
  • Advance at part load
  • Advance correction
  • Desired engine load calculation
  • Exhaust gas temperature
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Advance limiter
  • Lambda correction for exhaust manifold temperature
  • RPM Limiter
  • RPM/speed limiter 2
  • Knock detection factor
  • Speed limiter
  • Throttle air mass flow calculation
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Max torque profile
  • Optimal engine moment
  • Power limit torque table
  • Relative permissible torque from the pedal position in torque limitation
  • % relative air filling limit depending on IAT
  • Driver torque request
  • Torque limiter for selected gear
  • Throttle angle management

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.00.0324G0906014 0003 BOSCH MED17.1.6

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

MICRO Infineon Tricore TC1797 This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop