AUDI S6 (4F/C6) 5.2L V10 40V FSI 320kW/435HP ME9.1.1

ECU BOSCH MED9.1.1/MED9.1.2 · 435 CV (32 kW) · 5200 cc · Benzina aspirato

ECU DatabaseAUDI › AUDI S6 (4F/C6) 5.2L V10 40V FSI 320kW/435HP ME9.1.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 11 firmware versions

Vehicle data

BrandAUDI
ModelS6 (4F/C6)
Engine5.2L V10 40V FSI 320kW/435HP ME9.1.1
Stock power435 CV / 32 kW
Displacement5200 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED9.1.1/MED9.1.2
Memory / EPROMMICRO BGA+FLASH ESTERNA

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Advance full load
  • Load / throttle position reference
  • Injection at full throttle
  • Speed / RPM limiter
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • Knock detection factor
  • Speed limiter
  • Air mass flow

Firmware identifiers (11)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0261S022971037387488 1.85.0084F1910552B 0040 BOSCH MED9.1.1/MED9.1.2
0261S022981037387709 1.85.0044F1910552A 0040 BOSCH MED9.1.1/MED9.1.2
0261S023671037387930 1.85.0394F1910552C 0060 BOSCH MED9.1.1/MED9.1.2
0261S023671037382970 1.85.0124F1910552C 0040 BOSCH MED9.1.1/MED9.1.2
0261S024821037389462 1.85.0214F1910552H 0010 BOSCH MED9.1.1/MED9.1.2
0261S024821037393910 1.85.0044F1910552H 0020 BOSCH MED9.1.1/MED9.1.2
0261S024831037389473 1.85.0044F1910552J 0010 BOSCH MED9.1.1/MED9.1.2
0261S024841037389489 1.85.0114F1910552G 0010 BOSCH MED9.1.1/MED9.1.2
0261S026111037398048 1.85.0134F1910552S 0050 BOSCH MED9.1.1/MED9.1.2
0261S026131037397674 1.85.0064F1910562A 0010 BOSCH MED9.1.1/MED9.1.2
0261S027091037505122 1.85.0194F1910562B 0030 BOSCH MED9.1.1/MED9.1.2

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata