AUDI RS6 (C6/4F) 5.0L V10 40V TFSI 427kW/572HP ME9.1.1

ECU BOSCH MED9.1.1/MED9.1.2 · 580 CV (427 kW) · 5000 cc · Benzina sovralimentato

ECU DatabaseAUDI › AUDI RS6 (C6/4F) 5.0L V10 40V TFSI 427kW/572HP ME9.1.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 8 firmware versions

Vehicle data

BrandAUDI
ModelRS6 (C6/4F)
Engine5.0L V10 40V TFSI 427kW/572HP ME9.1.1
Stock power580 CV / 427 kW
Displacement5000 cc
FuelBenzina sovralimentato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED9.1.1/MED9.1.2
Memory / EPROMMICRO BGA+FLASH ESTERNA

Available tuning operations / options:

  • Advance at idle speed
  • Advance at part load
  • Boost pressure limiter for diagnostics
  • Boost pressure limiter
  • Boost pressure limiter 2
  • Boost pressure limiter 3
  • Load / throttle position reference
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • RPM Limiter
  • Knock detection factor
  • Speed limiter
  • P
  • Max boost pressure control
  • Air mass flow

Firmware identifiers (8)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0261S023711037398562 1.85.0074F1910552D 0080 BOSCH MED9.1.1/MED9.1.2
0261S023711037398562 1.85.0214F1910552D 0080 BOSCH MED9.1.1/MED9.1.2
0261S025721037398568 1.85.0324F1910552E 0040 BOSCH MED9.1.1/MED9.1.2
0261S025731037398567 1.85.0304F5910552 0080 BOSCH MED9.1.1/MED9.1.2
0261S025731037395110 1.85.0414F5910552 0030 BOSCH MED9.1.1/MED9.1.2
0261S025741037398570 1.85.0094F5910552A 0040 BOSCH MED9.1.1/MED9.1.2
0261S027681037502840 1.85.0114F5910552B 0010 BOSCH MED9.1.1/MED9.1.2
0261S027811037505008 1.85.0024F5910552C 0010 BOSCH MED9.1.1/MED9.1.2

Vehicle technical notes

OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata