AUDI R8 (42) MY12 4.2L V8 FSI 316kW/424HP MED9.1.1

ECU BOSCH MED9.1.1/MED9.1.2 · 430 CV (316 kW) · 4200 cc · Benzina aspirato

ECU DatabaseAUDI › AUDI R8 (42) MY12 4.2L V8 FSI 316kW/424HP MED9.1.1

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 5 firmware versions

Vehicle data

BrandAUDI
ModelR8 (42) MY12
Engine4.2L V8 FSI 316kW/424HP MED9.1.1
Stock power430 CV / 316 kW
Displacement4200 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMED9.1.1/MED9.1.2
Memory / EPROMMICRO BGA+FLASH ESTERNA

Available tuning operations / options:

  • Base timing
  • Optimal spark timing/MBT
  • Desired engine load calculation
  • Lambda correction for engine temperature after starting
  • Exhaust gas temperature
  • High pressure fuel pump setpoint
  • High fuel pressure pump limit for ECT sensor
  • Lambda enrichment for components protection
  • RPM Limiter
  • Lambda driver wish
  • Knock detection factor
  • Manifold absolute pressure time delay
  • Characteristic manifold absolute pressure time constant of the LRS
  • Optimal engine moment
  • Offset tolerance depending on permissible torque
  • Relative permissible torque from the pedal position in torque limitation
  • Driver torque request
  • Variable intake pulsation correction

Firmware identifiers (5)

Hardware No.Software No. (chip)VersionUpdate softwareECU
0261S028411037517082 1.00.004420910560T 0010 BOSCH MED9.1.1/MED9.1.2
0261S028411037533117 1.00.016420910560T 0020 BOSCH MED9.1.1/MED9.1.2
0261S028891037531168 1.00.020424910560J 0050 BOSCH MED9.1.1/MED9.1.2
0261S033011037535682 1.00.007424910560K 0010 BOSCH MED9.1.1/MED9.1.2
0261S033181037539065 1.00.020424910560N 0010 BOSCH MED9.1.1/MED9.1.2

Vehicle technical notes

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

→ See all add-on modules on the shop