Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 2 firmware versions
Vehicle data
| Brand | AUDI |
| Model | R8 (42) |
| Engine | 5.2L V10 FSI LMS GT 412kW/553HP MED9.1.1 |
| Stock power | 560 CV / 412 kW |
| Displacement | 5200 cc |
| Fuel | Benzina aspirato |
| Vehicle type | Auto |
ECU
Available tuning operations / options:
- Base timing
- Advance at idle speed
- Optimal spark timing/MBT
- Desired engine load calculation
- Lambda correction for engine temperature after starting
- Exhaust gas temperature
- High pressure fuel pump setpoint
- High fuel pressure pump limit for ECT sensor
- Injection at part load
- Lambda enrichment for components protection
- Lambda correction for exhaust manifold temperature
- RPM Limiter
- Lambda driver wish
- Knock detection factor
- Speed limiter
- Throttle air mass flow calculation
- Manifold absolute pressure time delay
- Characteristic manifold absolute pressure time constant of the LRS
- Optimal engine moment
- Driver torque request
- Throttle angle management
Firmware identifiers (2)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| 0261S02818 | 1037535195 |
1.00.039 | 42A910552A 0100 |
BOSCH MED9.1.1/MED9.1.2 |
| 0261S03304 | 1037535813 |
1.23.018 | 42B910552M 0010 |
BOSCH MED9.1.1/MED9.1.2 |
Vehicle technical notes
OBD located under the steering column, above the pedals. Visible or hidden by a plastic lid.
ECU notes
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
