AUDI Q7 (4M) 3.0L V6 24V TDI 200KW/268HP EDC17CP54 — ECU BOSCH EDC17CP54

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 8 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	AUDI
Model	Q7 (4M)
Engine	3.0L V6 24V TDI 200KW/268HP EDC17CP54
Stock power	272 CV / 2 kW
Displacement	3000 cc
Fuel	Diesel sovralimentato
Vehicle type	Auto

ECU

Manufacturer	BOSCH
Model	EDC17CP54
Memory / EPROM	Micro TC1793 + Flash esterna M58BW032FB

Available tuning operations / options:

Boost pressure limiter
Boost pressure limiter 2
Boost pressure
Boost pressure 2
Boost pressure 3
Boost pressure 4
Boost pressure 5
Maximum torque limitation at clutch
Max accepted exhaust gas temperature value before turbine
Max accepted exhaust gas temperature value at particulate sensor
Injection opening time related to inj. pressure
J
Torque limiter 2
Torque limiter 3
Torque limiter 4
Torque limiter
Specific injection pressure limiter
Relative permissible torque from the pedal position in torque limitation
Specific injection pressure
Specific injection pressure 3
Driver torque request
Torque limiter for selected gear

Firmware identifiers (8)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	—	1.00.011	4M0907401 0003	BOSCH EDC17CP54
—	—	1.00.013	4M0907401 0005	BOSCH EDC17CP54
—	—	1.00.022	4M0907401 0004	BOSCH EDC17CP54
—	—	1.00.010	4M0907401B 0003	BOSCH EDC17CP54
—	—	1.00.004	4M0997401B 1003	BOSCH EDC17CP54
—	—	1.00.028	4M0907401 0009	BOSCH EDC17CP54
—	—	1.00.009	4M0907401 0010	BOSCH EDC17CP54
—	—	1.00.005	4M0907401 0006	BOSCH EDC17CP54

Vehicle technical notes

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU notes

Micro Infineon Tricore TC1793 + External Flash M58BW032FB This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata