Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 7 firmware versions
Vehicle data
| Brand | AUDI |
| Model | Q5 (80A) |
| Engine | 40 2.0L 16V TDI 150kW/201HP MD1CS004 |
| Stock power | 204 CV / 15 kW |
| Displacement | 2000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | MD1CS004 |
| Memory / EPROM | Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte |
Available tuning operations / options:
- Boost pressure limiter
- Boost limiter correction for APS/BPS sensor
- Protection for cylinder head overheating
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value before turbine 2
- Max accepted exhaust gas temperature value before turbine 3
- Protection for engine overheating
- Basic torque management at engine cranking
- Basic torque management at engine cranking 2
- Basic torque management at engine cranking 3
- Injection period
- Injection period limit
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection 1
- J
- Injection 3
- Injection 4
- L
- Torque limiter 3
- Torque limiter 4
- Torque limiter
- Smoke limiter
- Lambda reference
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 4
- Speed limiter
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for fuel overheating 2
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Maximum pressure ratio limit depending on temperature
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 5
- Specific injection pressure 6
- Specific air mass charge
- Specific air mass charge 2
- Specific air mass charge 3
- Specific air mass charge 4
- Driver torque request
- Driver torque request 2
- Setpoint maximum turbocharger speed
- Overboost timing
- Overboost timing 2
- Overboost timing 3
- Overboost timing 4
- Overboost timing 5
- Torque limiter for the APS/BPS
- Turbocharger volumetric efficiency
Firmware identifiers (7)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | — |
1.02.016 | 05L906027AF 3239 |
BOSCH MD1CS004 |
| — | — |
1.02.016 | 05L906027AF 1463 |
BOSCH MD1CS004 |
| — | — |
1.02.019 | 05L906027AF 4030 |
BOSCH MD1CS004 |
| — | — |
1.02.031 | 05L906027AF 0759 |
BOSCH MD1CS004 |
| — | — |
1.02.006 | 05L906027H 9920 |
BOSCH MD1CS004 |
| — | — |
1.02.013 | 05L906027H 9972 |
BOSCH MD1CS004 |
| — | — |
1.02.024 | 05L906027BG 9970 |
BOSCH MD1CS004 |
ECU notes
Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
