AUDI A8 (D3/4E) 3.0L V6 24V TDI 171KW/229HP EDC16+ — ECU BOSCH EDC16U31/U34/CP34

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 28 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	AUDI
Model	A8 (D3/4E)
Engine	3.0L V6 24V TDI 171KW/229HP EDC16+
Stock power	232 CV / 171 kW
Displacement	3000 cc
Fuel	Diesel sovralimentato
Vehicle type	Auto

ECU

Manufacturer	BOSCH
Model	EDC16U31/U34/CP34
Memory / EPROM	M58BW016DB PQFP80 - Flash 3_V 512 x 32

Available tuning operations / options:

Boost pressure limiter
Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Boost pressure 2
Maximum torque limitation at clutch
Load / throttle position reference
EGR valve control
Exhaust gas temperature
Protection for engine overheating
Basic torque management at engine cranking
Engine idle vs. ECT sensor
Injection period
Injection period - correction
Injection opening time related to inj. pressure
J
Injection 2
Torque limiter 2
Lambda value of the smoke limitation
Minimum LSU sensor temperature for O2
Maximum LSU sensor temperature for O2
LSU temperature threshold PID heater governor activation
Protection for air load overheating
Protection for fuel overheating
Protection for oil overheating
Specific injection pressure limiter
Specific injection pressure
Q
Driver torque request
Torque limiter for the 1st gear selected
Torque limiter for the 2nd gear selected
Torque limiter for the 3rd gear selected
Torque limiter for the 4th gear selected
Torque limiter for the 5th gear selected
Torque limiter for the 6th gear selected
Torque limiter for for reverse gear
Torque limiter for the APS/BPS
Torque limiter in recovery mode
Turbocharger volumetric efficiency
Variable geometry duty cycle limit
Variable geometry duty cycle limit 2

Firmware identifiers (28)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	1037381397	1.67.017	4E0910402J 0010	BOSCH EDC16U31/U34/CP34
—	1037377109	1.67.019	4E0910401S 0030	BOSCH EDC16U31/U34/CP34
—	1037379484	1.67.019	4E0910401Q 0040	BOSCH EDC16U31/U34/CP34
—	1037384622	1.67.014	4E0910402J 0020	BOSCH EDC16U31/U34/CP34
—	10SW082797	1.67.013	4E0997401K 0001	BOSCH EDC16U31/U34/CP34
—	1037375254	1.67.033	4E0910401Q 0020	BOSCH EDC16U31/U34/CP34
—	1037381573	1.67.021	4E0910402G 0020	BOSCH EDC16U31/U34/CP34
—	1037384619	1.67.016	4E0910402F 0020	BOSCH EDC16U31/U34/CP34
—	1037379815	1.67.015	4E0910402 0020	BOSCH EDC16U31/U34/CP34
—	1037384618	1.67.023	4E0910402E 0020	BOSCH EDC16U31/U34/CP34
—	10SW086824	1.67.015	4E0997401D 0001	BOSCH EDC16U31/U34/CP34
—	1037384620	1.67.038	4E0910402G 0030	BOSCH EDC16U31/U34/CP34
—	1037370835	1.67.026	4E0910401A 0020	BOSCH EDC16U31/U34/CP34
—	1037370771	1.67.027	4E0910401H 0010	BOSCH EDC16U31/U34/CP34
—	1037371880	1.67.019	4E0910401H 0040	BOSCH EDC16U31/U34/CP34
—	1037372202	1.67.023	4E0910401B 0040	BOSCH EDC16U31/U34/CP34
—	1037374414	1.67.028	4E0910401S 0010	BOSCH EDC16U31/U34/CP34
—	1037379813	1.67.022	4E0910402B 0030	BOSCH EDC16U31/U34/CP34
—	1037372121	1.67.039	4E0910401J 0020	BOSCH EDC16U31/U34/CP34
—	1037372485	1.67.039	4E0910401J 0040	BOSCH EDC16U31/U34/CP34
—	1037381549	1.67.013	4E0910402F 0010	BOSCH EDC16U31/U34/CP34
—	1037371075	1.67.026	4E0910401H 0030	BOSCH EDC16U31/U34/CP34
—	1037375255	1.67.019	4E0910401H 0050	BOSCH EDC16U31/U34/CP34
—	1037381550	1.67.016	4E0910402E 0010	BOSCH EDC16U31/U34/CP34
—	1037372488	1.67.028	4E0910401B 0060	BOSCH EDC16U31/U34/CP34
—	1037379814	1.67.019	4E0910402A 0020	BOSCH EDC16U31/U34/CP34
—	1037379482	1.67.015	4E0910401S 0040	BOSCH EDC16U31/U34/CP34
—	1037377334	1.67.027	4E0910401Q 0030	BOSCH EDC16U31/U34/CP34

Vehicle technical notes

OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.

ECU notes

Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.

Original EPROM Am29BDD160G PQFP 80 Pin - Microprocessor Motorola MPC56x. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):

Rapid LPE - Modulo Aggiuntivo Dimsport +12 % € 199 Buy

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ All ECUs AUDI