English English Español Español Italiano Italiano Nederlands Nederlands Deutsch Deutsch 中文 中文 Français Français Lietuvių Lietuvių

AUDI A8 (D2/4D) 3.7L V8 40V 191kW/256HP ME7

ECU BOSCH ME7.1.1 · 260 CV (191 kW) · 3700 cc · Benzina aspirato

ECU Database › AUDI › AUDI A8 (D2/4D) 3.7L V8 40V 191kW/256HP ME7

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 6 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

BrandAUDI
ModelA8 (D2/4D)
Engine3.7L V8 40V 191kW/256HP ME7
Stock power260 CV / 191 kW
Displacement3700 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.1.1
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Advance limiter
  • Torque limiter
  • Knock detection factor
  • Speed limiter
  • Load/throttle position reference - AT
  • Air mass flow

Firmware identifiers (6)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612068401037360181 1.21.0074D0907558N 0003 BOSCH ME7.1.1
02612078911037367282 1.42.0094E0910560D 0070 BOSCH ME7.1.1
02612078921037367203 1.42.0114E0910560C 0030 BOSCH ME7.1.1
02612081501037368094 1.42.0104E0910560H 0020 BOSCH ME7.1.1
02612084941037368675 1.42.0124E0910560L 0010 BOSCH ME7.1.1
02612060181037350097 1.21.0104D0907558G 0003 BOSCH ME7.1/5

Vehicle technical notes

OBD with lid located in the central tunnel, ion the tray between the gear lever and the air conditioning controls.

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.
Original EPROM PSOP 44 pins 29F400BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy The Genius The Genius OBD + Bench € 2.500 Buy

Other AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ All ECUs AUDI