AUDI A6 (C8/4K) 40 2.0L 16V TDI 150kW/201HP MD1CS004

ECU BOSCH MD1CS004 · 204 CV (15 kW) · 2000 cc · Diesel mild hybrid - MHEV

ECU DatabaseAUDI › AUDI A6 (C8/4K) 40 2.0L 16V TDI 150kW/201HP MD1CS004

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 16 firmware versions

Vehicle data

BrandAUDI
ModelA6 (C8/4K)
Engine40 2.0L 16V TDI 150kW/201HP MD1CS004
Stock power204 CV / 15 kW
Displacement2000 cc
FuelDiesel mild hybrid - MHEV
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelMD1CS004
Memory / EPROMMicro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

Available tuning operations / options:

  • Boost pressure limiter
  • Boost limiter correction for APS/BPS sensor
  • Protection for cylinder head overheating
  • Maximum torque limitation at clutch
  • Max accepted exhaust gas temperature value before turbine
  • Max accepted exhaust gas temperature value before turbine 2
  • Max accepted exhaust gas temperature value before turbine 3
  • Protection for engine overheating
  • Basic torque management at engine cranking
  • Basic torque management at engine cranking 2
  • Injection period
  • Injection period 2
  • Injection period 3
  • Injection opening time related to inj. pressure
  • Injection opening time related to inj. pressure 2
  • J
  • Injection 2
  • Injection 3
  • Injection 4
  • Torque limiter 2
  • Torque limiter 3
  • Torque limiter
  • Smoke limiter
  • Lambda reference
  • Lambda value of the smoke limitation
  • Lambda value of the smoke limitation 3
  • Speed limiter
  • Protection for air load overheating
  • Protection for exhaust gas temperature before turbine
  • Protection for exhaust gas temperature before turbine 2
  • Protection for fuel overheating
  • Protection for oil overheating
  • Pressure control map over pressure regulating valve
  • Specific injection pressure limiter
  • Maximum pressure ratio limit depending on temperature
  • Specific injection pressure
  • Specific injection pressure 2
  • Specific injection pressure 5
  • Specific air mass charge
  • Specific air mass charge 2
  • Specific air mass charge 3
  • Q
  • Driver torque request
  • Driver torque request 2
  • Setpoint maximum turbocharger speed
  • Overboost timing
  • Overboost timing 2
  • Torque limiter for the APS/BPS
  • Turbocharger volumetric efficiency

Firmware identifiers (16)

Hardware No.Software No. (chip)VersionUpdate softwareECU
1.02.00805L906027BD 9656 BOSCH MD1CS004
1.02.02505L906027BD 9971 BOSCH MD1CS004
1.02.01105L906027E 9970 BOSCH MD1CS004
1.02.00205L906027AA 4027 BOSCH MD1CS004
1.02.00605L906027BC 7220 BOSCH MD1CS004
1.02.00705L906027E 6902 BOSCH MD1CS004
1.02.00905L906027AB 4028 BOSCH MD1CS004
1.02.01105L906027F 9971 BOSCH MD1CS004
1.02.00605L906022KQ 9971 BOSCH MD1CS004
1.02.01405L906027BC 9971 BOSCH MD1CS004
1.02.01805L906027BB 7221 BOSCH MD1CS004
1.02.00305L906027AA 1111 BOSCH MD1CS004
1.02.01005L906027BD 7219 BOSCH MD1CS004
1.02.02805L906027E 9971 BOSCH MD1CS004
1.02.00705L906027AJ 6907 BOSCH MD1CS004
1.02.01705L906027E 6315 BOSCH MD1CS004

ECU notes

Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Add-on modules available

A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):