Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 5 firmware versions
Vehicle data
| Brand | AUDI |
| Model | A6 (C7/4G) |
| Engine | 3.0L V6 24V TDI 200KW/268HP EDC17CP54 |
| Stock power | 272 CV / 2 kW |
| Displacement | 3000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC17CP54 |
| Memory / EPROM | Micro TC1793 + Flash esterna M58BW032FB |
Available tuning operations / options:
- Boost pressure limiter
- Boost pressure limiter 2
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Maximum torque limitation at clutch
- Max accepted exhaust gas temperature value before turbine
- Max accepted exhaust gas temperature value at particulate sensor
- Injection opening time related to inj. pressure
- J
- Injection 2
- Injection 3
- Injection 4
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Specific injection pressure limiter
- Relative permissible torque from the pedal position in torque limitation
- Specific injection pressure
- Specific injection pressure 3
- Driver torque request
- Torque limiter for selected gear
Firmware identifiers (5)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | — |
1.00.014 | 4G2907401B 0001 |
BOSCH EDC17CP54 |
| — | — |
1.00.011 | 4G0997401F 0002 |
BOSCH EDC17CP54 |
| — | — |
1.00.040 | 4G2907401B 0007 |
BOSCH EDC17CP54 |
| — | — |
1.00.019 | 4G2907401B 0002 |
BOSCH EDC17CP54 |
| — | — |
1.00.011 | 4G2907401B 0003 |
BOSCH EDC17CP54 |
Vehicle technical notes
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU located under the wipers, it may be necessary to remove the bulkhead and the wipers. Difficulty: medium.
ECU notes
Micro Infineon Tricore TC1793 + External Flash M58BW032FB This Setting File can be used for serial system NewGenius. ! WARNING ! This ECU is not enabled to be read. Start modification using certified original file from setting file. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
