Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 8 firmware versions
Vehicle data
| Brand | AUDI |
| Model | A6 (C7/4G) |
| Engine | 3.0L V6 24V TDI 160kW/215HP MD1CP004 |
| Stock power | 218 CV / 16 kW |
| Displacement | 3000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | MD1CP004 |
| Memory / EPROM | Micro BGA FREESCALE - 8192 Kbit - 800000 |
Available tuning operations / options:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Boost pressure 3
- Boost pressure 4
- Boost pressure 5
- Boost pressure 6
- Boost pressure 7
- Protection for cylinder head overheating
- Max accepted exhaust gas temperature value before turbine
- Protection for engine overheating
- Basic torque management at engine cranking
- Injection period
- Injection period 10
- Injection period 12
- Injection period 13
- Injection period 14
- Injection period 15
- Injection period 16
- Injection period 17
- Injection period 18
- Injection period 3
- Injection period 4
- Injection period 5
- Injection period 6
- Injection period 7
- Injection period 8
- Injection period 9
- Injection period limit
- Injection period limit 2
- Injection opening time related to inj. pressure
- Injection opening time related to inj. pressure 2
- Injection 1
- Injection 2
- Injection 3
- J
- Injection 5
- Injection 6
- Injection 7
- Torque limiter 2
- Torque limiter 3
- Torque limiter
- Lambda value of the smoke limitation
- Lambda value of the smoke limitation 2
- Lambda value of the smoke limitation 3
- Speed limiter
- Speed limiter 2
- Max torque profile - AT
- Protection for air load overheating
- Protection for exhaust gas temperature before turbine
- Protection for exhaust gas temperature before turbine 2
- Protection for fuel overheating
- Protection for oil overheating
- Pressure control map over pressure regulating valve
- Specific injection pressure limiter
- Specific injection pressure
- Specific injection pressure 2
- Specific injection pressure 3
- Specific injection pressure 4
- Driver torque request
- Driver torque request 2
- Driver torque request 3
- CAT downstream temperature sensor characterization
- CAT upstream temperature sensor characterization
- DPF downstream temperature sensor characterization
- Turbo upstream temperature sensor characterization
- Start of injection
- Start of injection 2
- Torque limiter for the APS/BPS
- Torque limiter in recovery mode
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware identifiers (8)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | — |
1.02.018 | 4G2907311G 0002 |
BOSCH MD1CP004 |
| — | — |
1.02.016 | 4G2907311G 0003 |
BOSCH MD1CP004 |
| — | — |
1.02.015 | 4G2907311G 0005 |
BOSCH MD1CP004 |
| — | — |
1.02.047 | 4G2907311B 0005 |
BOSCH MD1CP004 |
| — | — |
1.02.035 | 4G2907311B 0003 |
BOSCH MD1CP004 |
| — | — |
1.02.021 | 4G0997311C 0001 |
BOSCH MD1CP004 |
| — | — |
1.02.025 | 4G2907311B 0002 |
BOSCH MD1CP004 |
| — | — |
1.02.026 | 4G2907311G 0002 |
BOSCH MD1CP004 |
Vehicle technical notes
ECU located under the wipers, it may be necessary to remove the bulkhead and the wipers. Difficulty: medium.
ECU notes
Microprocessor BGA FREESCALE SPC57xxx This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata
Get the file for this vehicle
Tools to read and write this ECU
