AUDI A6 (C5/4B) 4.2L V8 32V 331KW/444HP ME7.5 — ECU BOSCH ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	AUDI
Model	A6 (C5/4B)
Engine	4.2L V8 32V 331KW/444HP ME7.5
Stock power	450 CV / 331 kW
Displacement	4200 cc
Fuel	Benzina aspirato
Vehicle type	Auto

ECU

Manufacturer	BOSCH
Model	ME7.5
Memory / EPROM	29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

Base timing
Optimal spark timing/MBT
Desired engine load calculation
Exhaust gas temperature
Torque limiter for diagnostic
Lambda enrichment for components protection
RPM Limiter
RPM limit for ECT sensor
RPM limit for EOT sensor
Lambda driver wish
Knock detection factor
Speed limiter
MAF sensor calibration
Throttle air mass flow calculation
Manifold absolute pressure time delay
Characteristic manifold absolute pressure time constant of the LRS
Optimal engine moment
Offset tolerance depending on permissible torque
Relative permissible torque from the pedal position in torque limitation
Driver torque request
Throttle angle management
Variable intake pulsation correction

Firmware identifiers (1)

Hardware No.	Software No. (chip)	Version	Update software	ECU
0261208921	1037376069	1.00.011	4F0910560E 0010	BOSCH ME7.5

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ All ECUs AUDI