Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.
✓ Tuning via file (flash)
✓ Add-on module available 11 firmware versions
Vehicle data
| Brand | AUDI |
| Model | A6 (C5/4B) |
| Engine | 3.0L V6 24V TDI 171kW/229HP EDC16U31/CP34 |
| Stock power | 232 CV / 171 kW |
| Displacement | 3000 cc |
| Fuel | Diesel sovralimentato |
| Vehicle type | Auto |
ECU
| Manufacturer | BOSCH |
| Model | EDC16U31/U34/CP34 |
| Memory / EPROM | M58BW016DB PQFP80 - Flash 3_V 512 x 32 |
Available tuning operations / options:
- Boost pressure limiter
- Maximum engine boost pressure F (atmospheric pressure)
- Boost pressure
- Boost pressure 2
- Maximum torque limitation at clutch
- Load / throttle position reference
- EGR valve control
- EGR valve control 2
- Exhaust gas temperature
- Protection for engine overheating
- Basic torque management at engine cranking
- Engine idle vs. ECT sensor
- Injection period
- Injection period 2
- Injection period - correction
- Injection opening time related to inj. pressure
- J
- Injection 2
- Torque limiter 2
- Lambda value of the smoke limitation
- Minimum LSU sensor temperature for O2
- Maximum LSU sensor temperature for O2
- LSU temperature threshold PID heater governor activation
- Protection for air load overheating
- Protection for fuel overheating
- Protection for oil overheating
- Specific injection pressure limiter
- Specific injection pressure
- Q
- Driver torque request
- Torque limiter for the 1st gear selected
- Torque limiter for the 2nd gear selected
- Torque limiter for the 3rd gear selected
- Torque limiter for the 4th gear selected
- Torque limiter for the 5th gear selected
- Torque limiter for the 6th gear selected
- Torque limiter for for reverse gear
- Torque limiter for the APS/BPS
- Torque limiter for the APS/BPS 2
- Torque limiter in recovery mode
- Turbocharger volumetric efficiency
- Variable geometry duty cycle limit
- Variable geometry duty cycle limit 2
Firmware identifiers (11)
| Hardware No. | Software No. (chip) | Version | Update software | ECU |
|---|
| — | 1037502341 |
1.67.013 | 4F9910401B 0040 |
BOSCH EDC16U31/U34/CP34 |
| — | 10SW087733 |
1.67.007 | 4F0997402J 0001 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037395460 |
1.67.009 | 4F0910409 0030 |
BOSCH EDC16U31/U34/CP34 |
| — | 10SW087677 |
1.67.012 | 4F0997409B 0001 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037379479 |
1.67.032 | 4F0910402N 0020 |
BOSCH EDC16U31/U34/CP34 |
| — | 10SW085176 |
1.67.014 | 4F0997402L 0001 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037391833 |
1.67.008 | 4F9ABT401B A020 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037389135 |
1.67.036 | 4F9910401B 0010 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037395437 |
1.67.037 | 4F9910401B 0030 |
BOSCH EDC16U31/U34/CP34 |
| — | 10SW085133 |
1.67.015 | 4F0997402H 0001 |
BOSCH EDC16U31/U34/CP34 |
| — | 1037502342 |
1.67.012 | 4F9910401L 0040 |
BOSCH EDC16U31/U34/CP34 |
Vehicle technical notes
OBD located to the left of the driver's side, accessible without removing anything to the left of the pedalboard.
ECU notes
Original EPROM ST M58BW016DB PQFP 80 Pin - Microprocessor Motorola MPC561/2/3/4. This Setting File can be used for serial system NewGenius. To modify this Ecu you can use the BDM system:555PRO or TRASDATA. WARNING:TRASDATA DO NOT need additional tools, 555PRO instead requires recalculation chks with VAG EDC16 CHECKSUM tool supplied with 555PRO, otherwise you will cause the block of the ecu or the detection of a change in the Ecu through diagnostic tool.
Original EPROM Am29BDD160G PQFP 80 Pin - Microprocessor Motorola MPC56x. This Setting File can be used for serial system NewGenius. To work on this ECU you can use NewTrasdata
Add-on modules available
A plug-and-play add-on module is available for this vehicle (as an alternative or in addition to the file):
Get the file for this vehicle
Tools to read and write this ECU
