AUDI A6 (C4/4A) 2.0L 20V 85KW/115HP ME7.5

ECU BOSCH ME7.5 · 116 CV (85 kW) · 2000 cc · Benzina aspirato

ECU DatabaseAUDI › AUDI A6 (C4/4A) 2.0L 20V 85KW/115HP ME7.5

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 1 firmware versions

Vehicle data

BrandAUDI
ModelA6 (C4/4A)
Engine2.0L 20V 85KW/115HP ME7.5
Stock power116 CV / 85 kW
Displacement2000 cc
FuelBenzina aspirato
Vehicle typeAuto

ECU

ManufacturerBOSCH
ModelME7.5
Memory / EPROM29F800 PSOP44 8Mbit - Flash 512K x 16

Available tuning operations / options:

  • Advance at part load
  • Load / throttle position reference
  • Injection at part load
  • Injection at full throttle
  • Advance limiter
  • Torque limiter
  • Lambda enrichment for components protection
  • Knock detection factor
  • Air mass flow

Firmware identifiers (1)

Hardware No.Software No. (chip)VersionUpdate softwareECU
02612079781037366471 1.21.0158E0909557H 0002 BOSCH ME7.5

ECU notes

Original EPROM PSOP 44 pins 29F800BB. In order to read this EPROM with the eprom programmer you need the adapter for PSOP and the card 15A with EMP20 or 202B with EMP21. On this epron can be set a KEY. ATTENTION !! ME7 ECU ! You can use the emulator ONLY to see the TRACE. MODIFY with the emulator ONLY with the engine OFF; DON'T modify with the engine ON. IX/LCP = INJECTION AT FULL LOAD, DECREASE VALUE TO INCREASE INJECTION! This Setting File can be used for serial system NewGenius. Attention! If you use the serial system: before start the program, disconnect the feeding on the fans radiator.