AUDI A5 (F5) 45 3.0L 24V TDI 160kW/215HP MD1CP004 — ECU BOSCH MD1CP004

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 2 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	AUDI
Model	A5 (F5)
Engine	45 3.0L 24V TDI 160kW/215HP MD1CP004
Stock power	218 CV / 16 kW
Displacement	3000 cc
Fuel	Diesel sovralimentato
Vehicle type	Auto

ECU

Manufacturer	BOSCH
Model	MD1CP004
Memory / EPROM	Micro BGA FREESCALE - 8192 Kbit - 800000

Available tuning operations / options:

Boost pressure limiter
Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Boost pressure 2
Boost pressure 3
Boost pressure 4
Boost pressure 5
Boost pressure 6
Boost pressure 7
Protection for cylinder head overheating
Max accepted exhaust gas temperature value before turbine
Protection for engine overheating
Basic torque management at engine cranking
Injection period
Injection period 10
Injection period 12
Injection period 13
Injection period 14
Injection period 15
Injection period 16
Injection period 17
Injection period 18
Injection period 3
Injection period 4
Injection period 5
Injection period 6
Injection period 7
Injection period 8
Injection period 9
Injection period limit
Injection period limit 2
Injection opening time related to inj. pressure
Injection opening time related to inj. pressure 2
Injection 1
Injection 2
Injection 3
J
Injection 5
Injection 6
Injection 7
L
Torque limiter
Lambda value of the smoke limitation
Lambda value of the smoke limitation 2
Lambda value of the smoke limitation 3
Speed limiter
Max torque profile - AT
Protection for air load overheating
Protection for exhaust gas temperature before turbine
Protection for exhaust gas temperature before turbine 2
Protection for fuel overheating
Protection for oil overheating
Pressure control map over pressure regulating valve
Specific injection pressure limiter
Specific injection pressure
Driver torque request
Driver torque request 2
Driver torque request 3
CAT downstream temperature sensor characterization
CAT upstream temperature sensor characterization
DPF downstream temperature sensor characterization
Turbo upstream temperature sensor characterization
Start of injection
Start of injection 2
Torque limiter for the APS/BPS
Torque limiter in recovery mode
Turbocharger volumetric efficiency
Variable geometry duty cycle limit
Variable geometry duty cycle limit 2

Firmware identifiers (2)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	—	1.02.011	8W0907311B 0003	BOSCH MD1CP004
—	—	1.02.012	8W0997311 1002	BOSCH MD1CP004

ECU notes

Microprocessor BGA FREESCALE SPC57xxx This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ All ECUs AUDI