AUDI A4 (B9/8W) 50 3.0L 24V TDI 210kW/281HP MD1CP004 — ECU BOSCH MD1CP004

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) ✓ Add-on module available 5 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	AUDI
Model	A4 (B9/8W)
Engine	50 3.0L 24V TDI 210kW/281HP MD1CP004
Stock power	286 CV / 21 kW
Displacement	3000 cc
Fuel	Diesel sovralimentato
Vehicle type	Auto

ECU

Manufacturer	BOSCH
Model	MD1CP004
Memory / EPROM	Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

Available tuning operations / options:

Boost pressure limiter
Maximum engine boost pressure F (atmospheric pressure)
Boost pressure
Boost pressure 2
Boost pressure 3
Boost pressure 4
Boost pressure 5
Boost pressure 6
Boost pressure 7
Boost pressure 8
Protection for cylinder head overheating
Maximum torque limitation at clutch
Max accepted exhaust gas temperature value before turbine
Max accepted exhaust gas temperature value before turbine 2
Max accepted exhaust gas temperature value before turbine 3
Protection for engine overheating
Basic torque management at engine cranking
Injection period
Injection period 10
Injection period 11
Injection period 13
Injection period 14
Injection period 15
Injection period 16
Injection period 17
Injection period 18
Injection period 19
Injection period 4
Injection period 5
Injection period 6
Injection period 7
Injection period 8
Injection period 9
Injection period limit
Injection period limit 2
Injection opening time related to inj. pressure
Injection 1
Injection 2
Injection 3
J
Injection 5
Torque limiter 2
L
Torque limiter 5
Torque limiter
LCL
Lambda value of the smoke limitation
Lambda value of the smoke limitation 2
Lambda value of the smoke limitation 3
Speed limiter
Speed limiter 2
Max torque profile - AT
Protection for air load overheating
Protection for exhaust gas temperature before turbine
Protection for exhaust gas temperature before turbine 2
Protection for fuel overheating
Protection for oil overheating
Pressure control map over pressure regulating valve
Specific injection pressure limiter
Specific injection pressure
Specific injection pressure 2
Specific injection pressure 3
Specific injection pressure 4
Specific injection pressure 5
Driver torque request
Driver torque request 2
CAT downstream temperature sensor characterization
CAT upstream temperature sensor characterization
DPF downstream temperature sensor characterization
Turbo upstream temperature sensor characterization
Start of injection
Start of injection 2
Torque limiter for the APS/BPS
Torque limiter in recovery mode
Turbocharger volumetric efficiency
Variable geometry duty cycle limit

Firmware identifiers (5)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	—	1.02.012	8W0907401G 0004	BOSCH MD1CP004
—	—	1.02.017	8W0907401B 0003	BOSCH MD1CP004
—	—	1.02.008	8W0907401K 0002	BOSCH MD1CP004
—	—	1.02.014	8W0907401L 0001	BOSCH MD1CP004
—	—	1.02.011	8W0907401H 0003	BOSCH MD1CP004

ECU notes

Microprocessor BGA FREESCALE SPC57xxx This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata