AUDI A4 (B9/8W) 40 2.0L 16V TDI 150kW/201HP MD1CS004 — ECU BOSCH MD1CS004

Find the firmware identifiers (hardware, software and update numbers), available tuning options and how to get the original or remapped file.

✓ Tuning via file (flash) 6 firmware versions

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file

Are you a workshop or tuner?

Vehicle data

Brand	AUDI
Model	A4 (B9/8W)
Engine	40 2.0L 16V TDI 150kW/201HP MD1CS004
Stock power	204 CV / 15 kW
Displacement	2000 cc
Fuel	Diesel sovralimentato
Vehicle type	Auto

ECU

Manufacturer	BOSCH
Model	MD1CS004
Memory / EPROM	Micro Infineon TRICORE categoria AURIX. Il micro ha una DFLASH da 848 Kbyte

Available tuning operations / options:

Boost pressure limiter
Boost limiter correction for APS/BPS sensor
Protection for cylinder head overheating
Maximum torque limitation at clutch
Max accepted exhaust gas temperature value before turbine
Max accepted exhaust gas temperature value before turbine 2
Max accepted exhaust gas temperature value before turbine 3
Protection for engine overheating
Basic torque management at engine cranking
Basic torque management at engine cranking 2
Injection period
Injection period 2
Injection period 3
Injection period 4
Injection period 5
Injection period 6
Injection period limit
Injection opening time related to inj. pressure
Injection opening time related to inj. pressure 2
J
Injection 3
Injection 4
L
Torque limiter 3
Torque limiter 4
Torque limiter
Smoke limiter
Lambda reference
Lambda value of the smoke limitation
Lambda value of the smoke limitation 2
Lambda value of the smoke limitation 4
Speed limiter
Protection for air load overheating
Protection for exhaust gas temperature before turbine
Protection for exhaust gas temperature before turbine 2
Protection for fuel overheating
Protection for fuel overheating 2
Protection for oil overheating
Pressure control map over pressure regulating valve
Specific injection pressure limiter
Maximum pressure ratio limit depending on temperature
Specific injection pressure
Specific injection pressure 2
Specific injection pressure 3
Specific injection pressure 5
Specific injection pressure 6
Specific air mass charge
Specific air mass charge 2
Specific air mass charge 3
Specific air mass charge 4
Driver torque request
Driver torque request 2
Setpoint maximum turbocharger speed
Overboost timing
Overboost timing 2
Overboost timing 3
Overboost timing 4
Overboost timing 5
Torque limiter for the APS/BPS
Turbocharger volumetric efficiency

Firmware identifiers (6)

Hardware No.	Software No. (chip)	Version	Update software	ECU
—	—	1.02.013	05L906027M 1049	BOSCH MD1CS004
—	—	1.02.009	05L906027F 6314	BOSCH MD1CS004
—	—	1.02.024	05L906027Q 1854	BOSCH MD1CS004
—	—	1.02.002	05L906027L 0844	BOSCH MD1CS004
—	—	1.02.003	05L906027Q 4025	BOSCH MD1CS004
—	—	1.02.029	05L906027F 6903	BOSCH MD1CS004

ECU notes

Micro Infineon Tricore TC298TP This setting file can be used with the New Genius, the protocol supports identification and writing only. IF the matching original file is already present in databank it can be used for the modification and the writing operation. To work on this ECU you can use NewTrasdata

Get the file for this vehicle

Buy the file (original or remapped)Register on mastertuningfile.com and order the file Are you a workshop or tuner?Offer these services yourself: activate your TuningFile platform

Tools to read and write this ECU

Flex Programmatore per rimappatura centraline e cambi automatici ECU + auto gearbox € 1.000 Buy

The Genius OBD + Bench € 2.500 Buy

Other AUDI

100
2.5L TDI 84kW/113HP 80
1.9L TDI 66kW/88HP A4 (B5/8D)
1.9L 8V TDI 81KW/109HP PLCC A6 (C4/4A)
2.5L 10V TDI 103KW/140HP MOTRONIC 80
2.0L 8V 85kW/114HP S2 (8Z)
2.2L 20V TURBO 162kW/217HP MOTRONIC M2.3 100
2.0L 16V 85kW/114HP MOTRONIC 80
2.0L 16V 103kW/138HP MOTRONIC 80
2.8L V6 24V 128kW/172HP 100
2.0L 8V 74kW/99HP

→ All ECUs AUDI